The Blackmagic Design HyperDeck Shuttle 2 SSD Video Recorder records uncompressed 10-bit HD and SD video as QuickTime files from any SDI- or HDMI-enabled camcorder. This updated version of the original HyperDeck Shuttle also records Avid's DNxHD 220x 10-bit codec. The extremely compact recorder accepts a 2.5" SATA solid state drive (sold separately) for data storage. Simply by bypassing the camera's compression, this allows you to get the highest-quality output possible from camcorders that typically record video as highly compressed HDV, AVCHD, or another similar codec.
With its uncompressed recording capability, HyperDeck Shuttle 2 shines on those projects for which even high-bit-rate ProRes and DNxHD codecs are too compressed for your needs. Perhaps you're shooting against a green screen and you'll need to be able to pull the cleanest key possible in post, or you're capturing background plates for special effects. Whatever the application, capturing to a supremely portable device with interchangeable media (which, with each succeeding generation, will grow in capacity as prices drop) is about the most elegant solution imaginable for recording uncompressed 4:2:2 HD video.
Sometimes, however, capacity is an issue, and HyperDeck Shuttle 2 offers the option of recording high-bit-rate compressed files. For Avid users, it doesn't get much more convenient than capturing 10-bit video as the extremely high-quality DNxHD 220x codec. Ready for the Media Composer timeline immediately, the MXF file type is available for 1080i59.94, 1080p29.97, and 720p59.94 formats.
The device features HDMI and SDI outputs for local playback from the device to an appropriate monitor on-set or in a screening room. HyperDeck Shuttle 2 features both a rechargeable internal Li-ion battery and a 12V DC power input that allows you to plug the device into a wall socket for continuous power.
Note: The HDMI output from DSLR cameras such as the Canon 5D/7D and Panasonic GH2 is intended for monitoring only, not for recording. 2.5" SATA SSD drives are sold separately. Off-the-shelf SSDs can be used as long as they are fast enough for uncompressed 10-bit capture (158 megabytes/second is required for 10-bit uncompressed 1920 x 1080 @ 29.97 fps).
Solid State Disk (SSD) TechnologySimply plug a 2.5” solid state disk into HyperDeck Shuttle and you get video recording with blazing fast speed, low power consumption and totally silent operation. Now you can eliminate complicated and expensive disk arrays. A single SSD can record either compressed or uncompressed video effortlessly! Removable media like CF and SxS cards simply cannot match that kind of performance and require slow file copying to use.
|What's in the box||
Blackmagic Design HyperDeck Shuttle 2