Deity Microphones S-MIC 2S Overview
Offering a shorter, lighter body than the S-Mic 2, the Deity Microphones S-Mic 2S moisture-resistant short shotgun microphone helps boom operators achieve broadcast-quality sound in reality TV, interviews, indie films, and documentaries, and its wider pickup pattern simplifies the capture of multiple subjects in the same shot.
Professional-level features such as low-noise circuitry and anti-RF interference construction minimize the need for noise reduction after recording. Thanks to the high sensitivity of the S-Mic 2S, robust output levels are possible without having to max out your preamp's gain control. Tonally, the S-Mic 2S offers the same sonic signature as the S-Mic 2—smooth and warm with low off-axis coloration and natural attenuation of bass frequencies below 50 Hz.
You'll find no switches, buttons, or dials on the S-Mic 2S, so you always depend on it to deliver consistent sound, reliability, and ease of use. The ultralightweight solid brass housing ensures toughness gig after gig, and its black speckle paint provides low reflectivity and added durability.
Ideal for Indoor/Outdoor Use
The PCB is also sprayed and coated with a clear epoxy, which allows the microphone to perform without issues even in the most humid environments. This coating also gives the microphone a water-resistance level that allows it to work in the rain without being damaged. The body of the microphone has been sprayed with a black speckle paint to give it an ultra-durable finish, so it looks professional in front of clients for years of ownership while being less reflective on set.
Broadcast-Quality Sound for Multi-Subject Shoots
Friendly for Long Days
Phantom Powered
Ideal for Boompole Mounting
Waterproof Hardshell Case
Deity Microphones S-MIC 2S Specs
Form Factor | Stand/Boom-Mount |
Sound Field | Mono |
Operating Principle | Line Gradient |
Capsule | Condenser |
Polar Pattern | Supercardioid |
Orientation | End Address |
Circuitry | Solid-State |
Pad | None |
High-Pass Filter | None |
Tone Adjustment | None |
Indicators | None |
On-Board Controls | None |
Windscreen | Foam (Included) |
Frequency Range | 50 Hz to 20 kHz |
Maximum SPL | 130 dB SPL |
Off-Axis Rejection | 4 dB at 60° >25 dB at 120° >15 dB at 180° |
Impedance | 75 Ohms |
Load Impedance | 800 Ohms |
Sensitivity | 32 dBV/Pa at 1 kHz |
Equivalent Noise Level | 15 dB A-Weighted |
THD | < 0.5% |
Output Connectors | 1 x XLR 3-Pin Male (on Mic) |
Operating Voltage | 24 to 48 V (Phantom Power) |
Operating Current Consumption | 1.5 mA |
Color | Black |
Mounting | 3/8"-16 Female, Mic Clip (with Included Hardware) |
Construction Material | Brass |
Operating Temperature | 14 to 158°F / -10 to 70°C |
Dimensions | ø: 0.75 x L: 5.83" / ø: 19 x L: 148 mm |
Weight | 3 oz / 85 g |
Deity Microphones S-Mic 2S Moisture-Resistant Short Shotgun Microphone
Mic Clip with Threaded 3/8" Female Mount
Foam Windscreen
Waterproof Hardshell Case
- Barcode: 43248
- UPC Barcode: 6971842180639
- Supplier Code: DTA0140D10