E-Image's ES-90 is a 35" slider supporting up to 15 lb payloads in multiple modes of operation. It features a flywheel belt-drive system offering adjustable resistance via a squeeze mechanism at the top of the flywheel. It also supports the use of an included crank, and can be used the traditional way upon removal of the flywheel. There are standard 1/4"-20 and 3/8"-16 tripod threads on the bottom and a 5/8" stand mount receiver on each end that allows mounting on C-stands and baby stands so you can set the slider at various heights.
The included outrigger feet are individually adjustable, so you can level the slider evenly on different surfaces. The camera mounting platform is a large 5 x 5" and has a bubble level, and the tripod mount plate (underneath the rails) is even larger at 5 x 6", allowing for sturdier tripod mounting. The slider also supports an optional motion control accessory that will let you take advantage of the smooth belt drive for time-lapse shooting.
- Key Features
-
- 35" slider supporting up to 15 lb payloads
- Flywheel belt-drive system
- Adjustable resistance
- 1/4"-20 and 3/8"-16 tripod threads
- 5/8" stand mount receivers for C-stands and baby stands
- Individually adjustable outrigger feet
- 5 x 5" mounting surface with a bubble level
- Supports optional motion control accessory
- Sealed-bearing wheel design
- 12 sealed bearings help smoothly distribute weight and minimize movement tolerances
- Adjustable rollers help minimize lateral movement for heavier rigs
| Length | 35" (90 cm) |
| Payload | 15 lb (6.8 kg) |
| Material | Aluminum and carbon fiber |
| Mounting Surface | 5 x 6" (12.7 x 15 cm) camera platform 5 x 5" (12.7 x 12.7 cm) tripod mount plate (underneath rails) |
| Mount Types | 1/4"-20 screw on mounting surface 1/4"-20 and 3/8"-16 tripod-mount threads 5/8" stand mount receiver at each end |
| Weight | 5.6 lb (2.54 kg) |
- Barcode: 24104
- UPC Barcode: 6948229842626
- Supplier Code: ES90