Godox XT-16 2.4 GHZ Radio Trigger Set for Flashes

The remote manual XT16 transmitters and receivers are basically the same on the outside as the previous FT-16 units, only the internals have been updated to Godox’s new 2.4GHz X radio system.

Most significantly though, the new XTR16 and XTR16s receivers now bridge the gap between the popular remote manual flash units like the AD360 bare bulb flashes, and V850 speedlites, and Godox’s latest X series TTL trigger system (and radio enabled master flash units).

X series transmitter units like the X1-C and X1-N will now fire and control remote manual power levels of AD360 and V850 flash units (with corresponding XTR16 and XTR16s clipped to the side of the flashes).

Radio enabled master flash units like the Godox TT685C / TT685N should also provide similar control when used as the transmitter unit on camera.

The X1-C transmitter is able to control the remote manual power levels of AD360 and V850 strobes, while also using the new AD600B in TTL mode (or remote manual mode) at the same time.

And all providing HSS if desired. (HSS mode must be switched on manually on the AD360 and V850 etc).

All 5 groups (A / B / C / D / E) of the X1-C and X1-N transmitter units work, and correspond with the groups set on the XTR16 and XTR16s receiver group dials.

Groups can also be turned on and off individually from the X1-C transmitter.

(Please note though – mixing TTL and Remote Manual groups, and turning groups on and off individually, requires 2012 onward camera bodies when using the X1-C transmitter for Canon).