With its four selectable polar patterns and versatile XLR and USB Type-C connectivity, the Saramonic SR-MV7000 large-diaphragm condenser microphone delivers quality sound for podcasters, live streamers, vocalists, and musicians using Mac/Windows computers, Android mobile devices, or traditional analog mic preamps. Since it can be placed on a table via the included stand or mounted on a boom arm, the SR-MV7000 is equally well suited for use at home or in the studio.
Utilising three condenser capsules, the SR-MV7000 can capture sound in stereo or one of three mono modes (cardioid, omnidirectional, and bidirectional). The USB output offers up to 24-bit / 192 kHz resolution for detailed digital signal. The built-in 3.5mm headphone jack and dedicated volume control make it easy to monitor your audio in real time with no latency. Additional controls are provided for mic gain, mute, and a low-cut filter. The SR-MV7000 can be run on USB power or 48V phantom power.
Studio Sound and Versatility
- Cardioid: Ideal for dialogue, vocal performances, and miking instruments
- Omnidirectional: Ideal for round-table podcasts, multi-person, and multi-instrument recordings
- Bidirectional (Figure-8): Ideal for two-person interviews and vocal or instrument recordings while rejecting sound from sides
- Stereo: Ideal for capturing a realistic stereo image, like recording sound effects, acoustic instruments, and environmental or ambient sounds
USB and XLR Connectivity
- USB Type-C to USB Type-A: For Mac and Windows computers
- USB Type-C: For Android mobile devices and computers with USB Type-C ports
- XLR 5-Pin to Dual XLR 3-Pin breakout cable: For mic preamps, audio interfaces, mixers, and professional processors
Advanced Control and Monitoring
Form and Function
Form Factor | Desktop / Stand/Boom Mount |
Sound Field | Mono, Stereo |
Stereo/Surround Configuration | A/B |
Operating Principle | Pressure Gradient |
Capsule | 3 x Condenser |
Polar Pattern | Cardioid, Figure-8, Omnidirectional |
Pattern Selection | Switched (Adjustable on Mic) |
Orientation | Side Address |
Circuitry | Solid-State |
Pad | None |
High-Pass Filter | 150 Hz |
Tone Adjustment | None |
Gain Adjustment | 0 to +30 dB |
On-Board Controls | Gain/Sensitivity, Headphone Volume, High-Pass Filter, Mic Mute, Polar Pattern |
Windscreen | None |
Frequency Range | 20 Hz to 20 kHz |
Impedance | 25 Ohms |
Sensitivity | -36 dB at 1 kHz |
Signal-to-Noise Ratio | 114 dB |
Output Connectors (Analog) | 1 x XLR 5-Pin Male (on Mic) 2 x XLR 3-Pin Male (on Detachable Cable) |
Output Connectors (Digital) | 1 x USB Type-C Female (on Mic) |
Headphone Connector | 1 x 1/8" / 3.5 mm |
A/D Conversion | 16 / 24-Bit |
Sample Rate | Up to 192 kHz |
Operating System Support | Android, Windows, macOS/OS X |
Mobile Device Compatibility | Android Smartphone (with USB Type-C) Android Tablet (with USB Type-C) |
Available Port | USB 2.0 |
Bus Power | USB |
Operating Voltage | 48 V (Phantom Power) |
Mounting | 5/8"-27 Female (via Integrated Hardware) Tabletop (Included) |
Operating Temperature | 14 to 131°F / -10 to 55°C |
Storage Temperature | -4 to 167°F / -20 to 75°C |
Dimensions | H: 11.96 x W: 4.52 x L: 5.31" / H: 30.38 x W: 11.48 x L: 13.49 cm (with Mount) |
Weight | 2.7 lb / 1.2 kg (with Mount) |
- Saramonic SR-MV7000 Large-Diaphragm Multipattern USB/XLR Condenser Microphone
- Tabletop Microphone Stand
- Pop Filter
- XLR 5-Pin Female to Dual XLR 3-Pin Male Y-Cable (50cm)
- USB Type-C to USB Type-A Cable (120cm)
- USB Type-C Cable (120cm)
- Barcode: 51366
- Supplier Code: sr-mv7000