The SmartRig+ Di from Saramonic is a two-channel audio interface that allows you to connect professional microphones or guitars to your iPhone, iPad, and iPod touch device. With a lightning connector output, the interface can be used to record stereo sound or music to your iOS portable device.
The SmartRig+ Di provides 48V phantom power for condenser microphones and is equipped with two XLR inputs, two 1/8" inputs, and two 1/4" inputs, and an 1/8" headphone output for real-time monitoring. There are two gain-control thumbwheels that make it easy to set levels for each channel separately.
| Frequency Response | 20 Hz to 20 kHz +/-0.5 dB |
| Total Harmonic Distortion (THD) | Less than 0.01% @ 1 kHz, -30 dBu input |
| Signal to Noise Ratio | 78 dB @ 1 kHz, -30 dBu input |
| Sample Rate | 44.1 kHz or 48 kHz |
| Input 1 | 1 x XLR mic input 1 x 1/4" / 6.35 mm guitar input 1 x 1/8" / 3.5 mm input |
| Input 2 | 1 x XLR mic input 1 x 1/4" / 6.35 mm guitar input 1 x 1/8" / 3.5 mm input |
| Output | Lightning connector output cable |
| Headphone Out | 1/8" / 3.5 mm jack |
| Gain | + 25 dBu to - 8 |
| Phantom Power | 48 V power supplies |
| Power Requirements | 1 x 9 V alkaline or lithium battery |
| Dimensions (L x W x H) | 4.7 x 1.6 x 1.6" / 120.0 x 40.0 x 40.0 mm |
| Weight | 130.0 g |
- Barcode: 45881
- UPC Barcode: 6971008026610
- Supplier Code: smartrig+ di