For mobile video creators in need of a comprehensive and cost-effective solution for one- or two-handed stabilisation, varied accessory mounting options, and quality audio capture, the Saramonic VGM checks all the boxes. It includes a handheld camera/smartphone stabilisation system, an array of 1/4"-20 and shoe mount points, and the Vmic Mini shotgun microphone; everything needed to achieve stable video and crisp sound, whether shooting with a camera or smartphone.
Plug-and-play operation makes it extremely easy to use right out of the box. With no batteries to install or charge, and no buttons or switches to operate, you can immediately start recording your YouTube videos, Facebook Live streams, and interviews, at home or on the go. The Vmic Mini includes two 3.5mm cables—a TRS cable for use with cameras and a TRS to TRRS cable to allow proper hookup to a smartphone or tablet equipped with a headphone jack.
Smartphone/Camera Video Kit
Complete Bundle for Vlogging and Video Production
Customisable
Expandable
Adjustable
Vmic Mini Microphone
Shotgun Mic for Focused Sound
Ultracompact Size Fits Anywhere
Built-In Shockmount Reduces Vibrations and Rumble
Bullet-Shaped Windscreen Blocks Wind Noise
Versatile Mounting Options
Runs on Plug-In Power
Cables for Cameras and Mobile Devices
- Short, coiled right-angle 3.5mm TRS to right-angle 3.5mm TRS cable with gold-plated connectors for connection to the mic input of DSLR and mirrorless cameras
- Short, coiled right-angle 3.5mm TRS to straight 3.5mm TRRS cable with gold-plated connectors for connection to the headphone jack of mobile devices such as smartphones and tablets
Form Factor | Camera-Mount / Shotgun Mic |
Sound Field | Mono |
Operating Principle | Pressure Gradient |
Capsule | 1 x Electret Condenser |
Diaphragm | 0.6" / 14 mm |
Polar Pattern | Cardioid |
Orientation | End Address |
Circuitry | Solid-State |
Pad | None |
High-Pass Filter | None |
Tone Adjustment | None |
Gain Adjustment | None |
Indicators | None |
On-Board Controls | None |
Windscreen | Foam (Included) |
Frequency Range | 75 Hz to 20 kHz |
Maximum SPL | 105 dB SPL (1 kHz, 5% THD) |
Impedance | 200 Ohms |
Sensitivity | -35 dBV/Pa at 1 kHz |
Signal-to-Noise Ratio | 75 dB SPL |
Output Connectors (Analog) | 1 x 1/8" / 3.5 mm TRS Female (on Mic) 1 x 1/8" / 3.5 mm TRS Male (on Detachable Cable) 1 x 1/8" / 3.5 mm TRRS Male (on Detachable Cable) |
Headphone Connector | None |
Operating Voltage | Not Specified by Manufacturer |
Color | Black |
Mounting | 1/4"-20 Female, Camera/Shoe-Mount (via Integrated Hardware) |
Construction Material | Aluminum |
Dimensions | H: 2.44 x W: 0.75 x L: 4.61" / H: 6.2 x W: 1.91 x L: 11.71 cm |
Weight | 2.43 oz / 69 g |
- Saramonic VGM Stabilisation, Mounting Rig, and Microphone Bundle
- Double-Sided Shoe Mount Rail
- 2 x Sliding Rails with 1/4"-20 Threaded Holes
- Smartphone Clamp
- Shoe-Mounted 1/4"-20 Post Adapter for Cameras and Smartphone Clamp
- 2 x Cold Shoe Mounts
- 2 x Hand Grips
- 2 x Screw Mounts
- Wrist Strap
- Saramonic Vmic Mini Ultracompact Camera-Mount Shotgun Microphone
- Fitted Foam Windscreen
- 3.5mm TRS Output Cable for Cameras
- 3.5mm TRS to TRRS Output Cable for Smartphones
- Barcode: 51367
- Supplier Code: vgm