Overview
A staple of the film and video industry, the 1.74m, black 50.8cm Riser C-Stand Turtle Base Kit from Kupo is comprised of a two-section double riser with a removable base, 50.8cm grip arm, and a 6.35cm grip head.
The Master C-Stand with Turtle Base from Kupo is a 50.8cm Century Stand designed to support light fixtures and modifiers weighing up to 10kg. Additionally, the stand has been given a black finish achieved by applying a black powder coating to the metal frame.
Constructed with both strength and capability in mind, the Master C-Stand features three sections—two of which are extendable—which bring the stand's maximum height to 1.74m. At its lowest, the stand collapses down to just 0.94m, and is capable of supporting up to 10kg at either height.
The stand's base is made up of a traditional three-leg configuration with each leg set at a different height to allow for stand "nesting" on set. Of the three legs, two feature a spring-loaded design which rapidly extends and locks them into place, while the third may be height-adjusted via a locking knob on the riser's main section. In order to improve strength, the base has been cast from durable zinc alloy, making it five times stronger than traditional aluminium designs. The locking collars have also been cast from aluminium in order to prevent damage and maintain longevity.
Often paired with a C-Stand, the black 50.8cm Hex Grip Arm from Kupo has a 5/8" hex pin at one end of a 50.8cm textured, non-slip steel tube and a 2-1/2" grip head at the other. The hex pin has 6 milled flat surfaces so that you can attach a light to it without it turning and use the arm like a mini boom. The grip head has a pair of rotating discs attached to a 5/8" receiver. The discs have 4 V-shaped jaws to accept 5/8", 1/2", 3/8" or 1/4" accessories like flags, scrims or even another grip arm. The jaws are locked down by an oversized, ergonomic T-handle.
The 2-1/2" Grip Head With Big Handle from Kupo has four V-shaped jaws, an ergonomic oversized T-shaped handle with dedicated roller bearings for maximum torque, and a non-slip aluminium friction disc. This durable grip head is made of aluminium and steel and has a black powder-coated finish.
Features
- Four V-shaped jaws
- Oversized T-shaped handle with dedicated roller bearings
- Non-slip aluminium friction disc
Specifications
| Master C-Stand with Turtle Base (50.8cm, Black) | ||
| Material of Construction | Zinc alloy, stainless steel, and aluminium | |
| Maximum Extension | 36.8" (93.5 cm) | |
| Minimum Extension | 68.1" (173 cm) | |
| Load Capacity | 22 lb (10 kg) | |
| 50.8cm Hex Grip Arm (Black) | ||
| Material of Construction | Steel and aluminium | |
| Attachments | 5/8" (16 mm) Receiver 5/8", 1/2", 3/8", 1/4" (16 mm, 12.7 mm, 9.5 mm, 6.35 **mm) jaws | 2-1/2" Grip Head With Big Handle (Black Powder-Coated Finish)** |
| Construction | Aluminium and steel | |
| Dimensions (LxWxH) | 7.38 x 3.92 x 2.79" (18.73 x 9.96 x 7.08 cm) | |
| Weight | 1.72 lb (0.78 kg) |
- Barcode: 38372
- UPC Barcode: 6954016562134
- Supplier Code: CT-20MKB