Tilta Basic kit for BMPCC 6K Pro- Tactical Gray

The tactical gray Tilta Full Camera Cage for Blackmagic Design Pocket Cinema Camera 6K Pro is a modular, formfitting cage that protects and enables accessory mounting for your camera. This cage features one NATO rail, one single-rod bracket mount, two ARRI-style rosettes, three shoe mounts, and multiple 1/4"-20 and 3/8"-16 threaded mounting holes for accessories. The bottom plate features Arca-style compatibility and multiple mounting holes for attaching to a tripod or gimbal.

Carry and stabilize your Blackmagic Design Pocket Cinema Camera 4K with this lightweight tactical gray Quick Release Top Handle from Tilta. The quick release handle's features include two shoe mounts, a 15mm rod port, multiple 1/4"-20 and 3/8"-16 threads, and a 3/8"-16 thread with locating pins.

The aluminum and stainless steel handle attaches to your camera cage using the included spring-loaded thumbscrew. The 15mm rod port features a rod locking screw to add a rod to the handle. There is one 3/8"-16 thread with locating pins on the front of the handle to mount a separately available Tilta cage rod mount.

Mount your Samsung T7 SSD onto your cage with this Tiltaing SSD Drive Holder for T7 from Tilta, in a tactical gray finish. The drive holder is designed specifically to hold the Samsung T7 SSD (not included) and mount it on half and full Tiltaing camera cages, providing you with a secure way to attach your SSD to your camera cage. The holder attaches using a 1/4"-20 screw and locking pin to prevent twisting, and it protects your USB Type-C cable as well. Made from aluminum alloy and stainless steel, the holder is both lightweight and strong, and the tactical gray finish provides corrosion protection.

Add rods to your Blackmagic Design Pocket Cinema Camera 6K Pro camera when using the Tilta Half Cage with the extended bottom plate for the Blackmagic Design battery grip, with this tactical gray 15mm Rod Holder from Tilta. This rod holder enables you to use cinema-style accessories with your camera, battery grip, half cage setup (cage, extended bottom plate, and battery grip not included), which otherwise would not be possible, as the battery grip would raise the camera too far above the correct lens center-to-rod distance when using standard baseplate rod clamps.

This holder/clamp supports the 15mm LWS standard for rod supports, and it mounts on your cage via the extended bottom plate. The mounting screw attaches the rod holder to the cage, and the two locking pins on the holder interface with the divots on the cage to secure the holder to prevent shifting during use. The rod clamp locking lever is set underneath so that it's out of the way.

Make it easier to plug in your camera's HDMI cable when using Tilta's Blackmagic Design Pocket Cinema Camera 4K cage with this HDMI Right-Angle Adapter. The adapter is designed at a 90° angle and attaches to the corner of the cage with a thumbscrew. This puts the male HDMI type A connector in place to plug into your camera, and the female HDMI type A end remains unimpeded.

The 12" 90° USB Type-C Cable for BMPCC 4K Cage from Tilta is designed to closely fit your Blackmagic Pocket Cinema Camera 4K when mounted on its Tilta cage. Features include right-angle USB Type-C connectors with thumbscrew anchors on each end.