SmallRig CVB2254 Overview
This SmallRig Half Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K is formfitting and made from aluminum alloy so it is both light and strong to help protect your camera from the rigors of daily production life. The half cage accomplishes this without impeding access to your camera's functions, ports, battery, or camera grip. The camera mounts on the cage via a 1/4"-20 screw with two locating pins that prevent the camera from twisting. Rubber grip pads cushion your camera from metal-to-metal contact, and a top mounting hole provides an additional anchor point.
The cage incorporates a cold shoe, multiple 1/4"-20 and 3/8"-16 threads, plus two ARRI-style anti-twist mounts. It also features two integrated NATO rails, one on the cage riser and the other on top of the cage. The bottom of the cage is tapped for 1/4"-20 and a 3/8"-16 threaded mounting hole to connect a camera plate for tripod mounting. The bottom front has two tapped holes for optional lens support.
Accessory Mounting Screw Holes
The cage incorporates thirty-one 1/4"-20 threaded mounting holes for attaching accessories. It also has five 3/8"-16 threaded mounting holes, three on top and two on the left-side of the half cage. Two 3/8"-16 threaded holes feature ARRI-style anti-twist divots to help keep your accessories from rotating when attached.
NATO rails are integrated into the top and side of the half cage's construction.
An integrated cold shoe allows for mounting accessories with a cold shoe mounting foot.