The Sony AN-820A/9L UHF active antenna incorporates an amplifier to compensate for signal deterioration caused by cable transmission and distribution. Unique and inconspicuous design allows installation on a wall or in a mic stand with the supplied adapter. Powered by the MB-806A or the WD-820A via coax cable.
Booster Gain18 +12 dB (with 12 V DC)
10 ±12 dB (with 9 V DC)
Voltage Standing Wave Ratio3.0 or less
Noise Figure4 dB or less
Third Order Intermodulation60 dB or more (85 dBµVEMF input)
Input/Output
Output ConnectorBNC-R, 50 O
General
Power Requirements9 V/12 V DC
Power Consumption50 mA or less
Operating Temperature32°F to 122°F
0°C to 50°C
Storage/Transport Temperature-4°F to +140°F
'-20°C to +60°C
Dimensions *[1]Approx. 70 × 117 × 132 mm (W x H x D)
Approx. 2 7/8 x 4 5/8 x 5 1/4 inches (W x H x D)
MassApprox. 9 oz
Approx. 270 g
SONY AN820A UHF ANTENNA
Warranty Card (1)
Wall mounting attachment(1)
Power utility box mounting attachment (1)
Operating Instructions (1)
Mounting screws (1 set)
Microphone stand mounting adapter (PF 1/2 screw) (1)
- Barcode: 45221
- UPC Barcode: 4905524797558
- Supplier Code: AN820A