Battery Mounting Plates

Key Features Mounts Directly onto RED KOMODO Camera For Single 14.4V Gold Mount Battery D-Tap, USB Type-A & 2-Pin LEMO Outputs Enables Hot Swaps with AC Power Core SWX CXA-KOMU Overview Power your RED KOMODO camera as well as a...

Key Features Attaches to Rear of FX6 Camera Supports Gold Mount Battery Hot-Swappable Power 1 x 11.9-17V D-Tap and 1 x 5V USB Output Core SWX CXAM-FX6 OverviewAdd a professional, high-capacity battery plate to power your Sony FX6 rig...

Key Features Attaches to Rear of FX6 Camera Supports V-Mount Battery Hot-Swappable Power 1 x 11.9-17V D-Tap and 1 x 5V USB Output Core SWX Articulating V-Mount Battery Plate for Sony PXW-FX6 Overview Add a professional, high-capacity...

Key Features Mounts Directly onto RED KOMODO Camera For Single 14.4V V-Mount Battery D-Tap, USB Type-A & 2-Pin LEMO Outputs Enables Hot Swaps with AC Power Core SWX Red Komodo BP Mount to V-Mount Plate Overview  Power your RED...

Key Features: Adapt a Sony L Series battery plate V-mount battery plate. Much greater battery life of a V-mount battery to power your camera setup Keeping battery swaps to a minimum. Tilta Sony L Series to V Mount Adapter Battery Plate Type II -...

Key Features Attaches Directly to Rear of the Camera Connects via 19.5 VDC Output Cable 4-Pin XLR Input for Hot-Swapping Two D-Tap Outputs The V-mount Core SWX Battery Plate for Sony PXW-FX9 attaches...

Key Features 2 x LP-E6 Type Batteries Wall Charger with Flip-Out Plug Includes Euro Plug Adapter Includes 12V Vehicle Adapter SmallHD LP-E6 Battery And Charger Kit Overview Power your monitor with the SmallHD LP-E6 Battery...

Key FeaturesV-mount battery plate25-45mm C-stand installD-tap DC outputV-mount Plate With Clamp OverviewS-7200S is a V-mount battery plate with clamp, to install on 25-45mm diameter C-stand / Light tripod, with 1x D-tap socket to output battery DC...

Key Features For URSA & URSA Mini/Mini Pro Cameras Supports URSA 12V Power Requirement Molex Connector This URSA Gold Mount Battery Plate from Blackmagic Design features a Molex connector, and enables you to power your URSA...

Key Features Power Camera and Accessories V-Mount Battery Plate 14.8V 2-pin LEMO-Type Output 14.8V 3-Pin Fischer, 5 x D-Tap Outputs Tilta UBP-V OverviewDesigned to power your camera and accessories, the Universal Battery Plate from Tilta...

SmallRig DV Battery Plate Adapter for BMPCC/BMCC/BMPC 1765 is a battery adapter which fits securely on the back of F970/F750/F550 battery on the rear of the panel. It gives users the ability to convert voltage to 12v easily and could attach camera...

Key Features 5V USB Power Output Able to charge tablets, smartphones, remotes and more IDX V-Mount Adapter Plate with a USB Connector Overview The IDX TA-PV2USB V-Mount Adapter Plate with a USB Connector allows you to directly mount the ENDURA...

Key Features P-Tap Output Supports Digi-View Syncron System Built In   IDX System Technology P-VS2 Overview The IDX P-VS2 V-Mount Battery Plate converts any professional camera to a V-Mount...

Key Features 2-Pin D-Tap DC Out / DigiView P-V2 Plate Series Variation Attaches V-Mount Battery to Camera V-Mount Connection, Precise DC Power   IDX...

Key Features Five D-Tap Outputs Each D-Tap Draws 2A   IDX ENDURA Multi D-Tap Adaptor Overview The IDX Multi D-Tap...

Key Features 96Wh capacity PowerLink capability (stackable up to four IPL-98/IPL-150 or IDX brand V-mount battery) Meets passenger aircraft travel regulations Capable of handling up to 10.5A loads (14A when linked)‡ IDX (96Wh) PowerLink...

Key Features Power Linking for Extended Runtime 14.4V 143Wh V-Mount Battery Data Information Displays...

Key Features 96Wh capacity with the ability to handle high current draws of 10A/120W Designed to meet Japan’s PSE safety regulations for mechanical and electrical...

Key Features 14.4V 191Wh V-Mount Battery Data Information Displays in Viewfinder Handles Up to 14A Loads Two Unregulated D-Tap Accessory Outputs     ...

Key Features 14.4V 143Wh V-Mount Battery Data Information Displays in Viewfinder Handles Up to 14A Loads Two Unregulated D-Tap   IDX (143Wh) Li-ion V-Mount Battery The IDX DUO-C150 143Wh High-Load Battery...

Key Features Supports up to 6.3A Draw Internal Pack Design Protects Cells 14.8 to 16.8 VDC Output Voltage D-Tap Output, 4-LED Power Gauge       IDX (91Wh) Li-ion V-Mount Battery Overview Power your...

Key Features High-Capacity and High-Load Battery Supports up to 14A Draw V-Mount Internal Pack Design Protects Cells IDX (286Wh) Li-ion V-Mount Battery Power your camera or other pro video equipment with the...

Sony FW50 battery charger plateSony FW50 battery charger plate1 x Sony FW50 Battery charger plate  Charger sold sep

F550 Battery Charger PlateF550 Battery Charger Plate1 x F550 Battery Plate Charger sold sep

Canon LP-E6 Battery charger plateCanon LP-E6 Battery charger plate1 x LP-E6 Battery charger Plate Charger sold sep

Product Highlights SONY NP-F DV battery adaptor plate SWIT S-8972/S-8970/S-8770 and SONY NP-F970/F-770 fit Snap-on type installation Fit for SWIT monitors and lightings Product Highlights SONY NP-F DV battery adaptor plate SWIT...

Product Highlights Charger for SWIT S-8845/8945 battery 2-ch simultaneous charging Compatible with Canon BP series DV battery 2 DC adapting output sockets 4-level LED charging indicators Product Highlights Charger for SWIT S-8845/8945...

The Tilta TA-BTP-F970 is an F970 battery baseplate attaches directly to the bottom of the half and full camera cages and comfortably houses a Sony F970 battery. A dummy battery cable can then be used to power your camera using the extended battery life...

The Tilta TA-BTP-V is a V-Lock Battery Plate designed to used with the Tilta BMPCC 4K Cage Rig.The Tilta TA-BTP-V is a V-Lock Battery Plate designed to used with the Tilta BMPCC 4K Cage Rig.Compatibility: Tilta BMPCC 4K Cage Rig

Tilta Power Supply - Blackmagic camera This Tilta Power Supply System is designed to provide power to your Blackmagic Cinema Camera and devices while on-the-go. The system features a V-mount battery plate and outputs for 12V, 8V, and 5V coaxial as well...

The DOF F2 BP/V mount battery plate is an V mount battery adapter. With this special V mount battery adapter, you don't need to buy an expensive BP lithium/V mount battery anymore. You can put 2 Sony NP-F series batteries onto the V-mout battery...

The SmallHD Cheese Plate for Gold Mount/V-Mount Brackets & Accessories provides pro-battery mounting solutions and utilises RapidRail for quick and secure mounting options. Features: 1/4" mounting holes provide extreme...

The SONY Battery Plate fits SONY F970 & F550. See full product listing for complete range of eligible batteries.The SONY Battery Plate fits SONY F970 & F550 and following...

PRODUCT HIGHLIGHTS V-Mount Bracket Mounts quickly and securely to 503 and 703 PRODUCT HIGHLIGHTS V-Mount Bracket Mounts quickly and securely to 503 and 703 Height 3.1" (7.87cm) Width .8" (2.03cm) Depth/Length 5" (12...

The FV100 Battery Charger Plate is used for charging Sony FV100 batteries.The FV100 Battery Charger Plate is used for charging Sony FV100 batteries.1 x Sanger FV100 Charger Plate

- Allows you to power 4-Pin XLR devices with a V-Lock battery.- This can be used to power the Nanguang CN-60F.- Allows you to power 4-Pin XLR devices with a V-Lock battery.- This can be used to power the Nanguang CN-60F.Compatibility: NP-F530, NP-F550,...

The URSA VLock Battery Plate from Blackmagic Design attaches third party batteries to your URSA camera. The VLock connects directly to the back of the URSA. Includes a D-Tap port for accessory power    The URSA...

Key FeaturesAdjustable shoulder pad allows front and back adjustmentsEasily and quickly change between studio and handheld configurationsPadding material provides more comfort and better fit on your shoulderComes with a height-adjustable 15mm rods...

Supports all V-lock style batteries. Power the camera and other accessories. Designed for Sony PXW-FS7. 1 x 12v, 1 x D-Tap. 1 x 8V, 1x 5v. Includes mounting plate for attaching to back of camera.  The Tilta FS-T01 V-Lock Battery Plate is...

Product Highlights Designed to Mount Directly to Panasonic EVA1 14.8V P-tap output 12V DC outputs 8V DC output 15mm LWS rod adapter Product Highlights Designed to Mount Directly to Panasonic EVA1 14.8V P-tap output 12V DC outputs 8V DC...

PRODUCT HIGHLIGHTS To adapt V-mount power solutions Build-in D-tap DC output socket Open-end wires for customer connection Rear metal plate for installation PRODUCT HIGHLIGHTS To adapt V-mount power solutions Build-in D-tap DC output...

SMALLRIG Battery Back 1547 allows mounting of Anton Bauer QRC, Switronix, RED, Blueshape, IDX ect. It mounts to standard 15mm rods with the 15mm rod clamp(60mm apart). All necessary screws and spanners are included.SMALLRIG Battery Back 1547 allows...