Light Stands & Mounting

Key features Vertical Stand for 15X and 30X Tubes Folds Down for Travel Mounts via 1/4"-20 Threads on Tube Collapsible, Weighs 0.5 kg A handy, space-saving accessory, the Nanlite LS-FL-1/4 Floor...

Key Features 3 Sections Braced Legs Aluminum Construction Spring-Cushioned Godox 304 OverviewThe aluminum model 304 Light Stand from Godox is a three-section support with braced legs that rises to a maximum height of 6.5', and...

Key Features For 4 Quick Stack Light Stands up to 35" Padded Cordura Nylon Bag Attached Shoulder Strap with Pad The Manfrotto LBAG90 Quick Stack Light Stand Bag, (Small) (Black) is a Cordura...

Attaches to Base of the Ricoh TD-1 Stand For Better Stability in Windy Conditions The Ricoh TT-1 Stand Weight is designed to hold down the Ricoh TD-1 stand (sold separately) for better stability in windy conditions. It goes over the base of the...

FeaturesFor S30 Focusing LED LightMaximum Height: 7'Minimum Height: 1.7'Reversible Leg DesignThe 213B Light Stand for the S30 focusing LED light from Godox rises to a maximum height of 7' and folds down to 1.7'. This four-section stand has a...

KEY FEATURES Water-Resistant Cordura Nylon Double Zippered Upper and Lower Nylon Hand Straps M11-032B OverviewStabilize your light stands, boom arms, backgrounds, and more with the Meking M11-032B. Easily transport the empty saddlebag to your...

KEY FEATURES Load Capacity: 10 kg Max. Height: 2.8 m Min. Height: 1.2 m  Folded Length: 1 m  Meking L-3000FP Overview This Meking L-3000FP Heavy-Duty Air-Cushioned Light Stand is a black anodized aluminium support that rises...

Key Features Load Capacity: 3kg (at max height) ...

Key Features Holds Select 24" Tripods Ballistic, Water-Repellent Coated Nylon Padded End Cap Zipper Extends the Entire Length Manfrotto MBAG60N OverviewMade of strong, ballistic nylon for resisting tears and...

  Key Features Quick Stack System 3 Sections, 2 Risers Removable, Reversible Spigot Accepts Caster Wheel Set Manfrotto Alu Ranker Stand Overview The Manfrotto Alu Ranker Air-Cushioned Light Stand is a black...

  Key Features Storage solution for light stands Material: steel, Matte black surface Kupo KS-118BT Overview Kupo Black Stand Hanger for Studio or Truck 46.5" - great storage solution for light stands whether it...

Key Features Storage Solution for light stands whether it be on a Truck or in the studio Recommended to mount on to a 2x4 or 2x2 to help prevent scratching or hitting the wall when stands are mounted. Place stands on stand hanger using the baby mount or...

Key Features: 185M/ Low Mighty Baby Stand 2 risers, 3 sections Dia. 35mm, 30mm, 25mm Leg: 22mmX22mm Kupo 185M Low Mighty Baby Stand Overview The Kupo 185M Low Mighty Baby Stand is ideal for supporting a heavy light at a low level. The stand...

Key Features 1 riser, 2 sections Dia. 45mm, 40mm Maximum operating height: 115cm (45.27”) Minimum operating height: 58cm (22.83”) iFootage 161MB Slider Stand OverviewThe Kupo Slider Stand combines perfect build quality, weight and...

Key Features Four V-shaped jaws Oversized T-shaped handle with dedicated roller bearings Non-slip aluminium friction disc CT-40MKB Overview The 2.96m, black 101.6cm Riser C-Stand Turtle Base Kit from Kupo is outfitted with a...

Key Features Detachable Turtle Base Twist & Release Locking Legs 40" Main Section, 2 Risers Sturdy Chrome Steel Construction Impact LS-CT40M Overview This Impact Turtle Base C Stand features a detachable base with twist and...

Key Features: It has an industry standard Junior base of 28mm (or 1 1/8") and on top it has a 16mm (5/8") babyspigot. This C-Stand tube can be used as an upright on a set of C-Stand roller wheels or as an extention for large stands with a 28mm Junior...

Key Features Load Capacity: 22 lb Max Height: 68.1" Min Height: 36.8" 3 Sections Kupo 20" Master C-Stand Turtle Base OverviewThe Master C-Stand with Turtle Base from Kupo is a 20" Century Stand designed to support light...

Key Features Master Series C Stand with Sliding Leg2 riser, 3 sectionsDia. 35mm, 30mm, 25mmChrome plated steel for silverPowder coated steel for blackKupo CS-30M Overview Kupo sliding leg C stand features one sliding leg, which allows the stand...

For News Gathering, Filmmaking & Video Sturdy, Lightweight Carbon Fiber Extends from 3.2 to 11.5' Five Telescoping,...

A compact photo stand that packs a mighty punch. The Nano Black Stand combines clever and compact features with a strong anodised frame. Come rain or shine, you can be sure that this hardwearing stand won’t flake, rust or wobble under pressure,...

Key Features Stabilizes Light Stands or C-Stands Bag Filled with 2mm Steel Balls Used as Counterweight on Boom Arms Made from Cordex Textured Nylon Kupo Shot Bag 25LBS OverviewThis 25 lb saddle bag-design Shot Bag from Kupo is...

This K-3 C-stand is constructed of chrome steel. The stand features one sliding leg, which allows it to adapt to uneven terrain such as stairs or hillsides. This feature provides optimum support for your light heads, reflectors or gobos.This grip kit...

Description Studio  stand 1.Maximum operating height  2200mm2.Min height  230mm3.Folded height 1060mm 4.Net weight 9.8kg5.Max load capacity 15.0kg 6.Leg diameter :¢20*¢40mmDescription Studio  stand 1.Maximum operating...

Key Features: Extends up to 3.8m Folds down to 1.04m Relatively lightweight Air-cushioned to reduce risk of injury Compatible with continuous lights or strobes (flashes) Double sided spigot also allows for devices...

Key Features Load Capacity: 3kg (at max height) ...

PRODUCT HIGHLIGHTS Casters (25mm) Locking Wheel Set Net weight: 2.11g PRODUCT HIGHLIGHTSCasters (25mm)Locking Wheel SetNet weight: 2.11g A set of 3 castor wheels by Meking. Product Name: M11-036 Casters (25mm) Φ 25 Locking Wheel...

Gross Weight 1.28kg C stand Arm 100cm with Grip Head M11-033L 1.28kg 1.28kg

Key Features: Can be fixed on the wall or the ceiling Great if you have a limited amount of space Come with all screws and fittings Compatible with continuous lights or strobes (flashes) Double sided spigot also allows for devices...

Features: Payload: 5kg Max height: 190cm Min height: 66.5cm Weight: 1.2kg The Jinbei compact EQ200 is ideal for speedlights or small LED pannels. It is light and easy to transport.Features:Payload: 2.5kgMax height: 190cmMin height: 66.5cmWeight: 1...

This product is proudly brought to you by PHOTOGEAR.Jinbei M-1 Boom Stand is made of high class aluminum materials, it is tough and durable. Features:Used for light stand and top light stand Easy to adjust and carry.180 regulationSpecifications:Stand...

This product is proudly brought to you by PHOTOGEAR.Jinbei DBJ-1 Medium Boom Stand is a medium sized boom stand with balance weightDependable installmentStable and easy to useSpecifications:Stand Height: 85-155cmArm Diameter: 35mmArm Length: 218cmBalance...

The Meking ML-3000FP is a heavy duty light stand Maximum height 2840mm Minimum height 1200mm Folded length 1060mm Weight 2.50 kg Sections 3 Tube diameter 35mm, 30mm, 25mm Leg diameter 22mm Max...

Key Features: Heavy duty light stands Large base footprint for added stability Holds up to larger lights with accessories Compatible with continuous lights or strobes (flashes) Double sided spigot also allows for devices...

Key Features: Extremely compact light stand with invertable legs Can sit flush to the floor for added stability Lightweight and portable Compatible with continuous lights or strobes (flashes) Double sided spigot also allows for devices...

Product Highlights The Durable and Compact folding design is easy to carry The 1/4" Thread interface allows you easily mount a Flash Light, Softbox, reflector, Umbrella with a 1/4" adapter Quick Release Locking System makes it more stability and...

K5 C standThis Meking K5 C stand with Turtle Base C-Stand Grip Arm Kit features a detachable "turtle" base that can be removed for easier transport.A light head can be mounted to the base directly with the aid of an optional stand adapter. This...

Constructed of steel, and finished in black, this Meking 3.0" Baby Pin Wall Plate is a handy accessory on any type of production set. All that's needed is a flat surface for its base and optional screws to mount it to walls, ceilings or floors. It's...

This product is proudly brought to you by Photogear.Sandbags are used for securing the bases of light stands and set walls. This Meking saddle style bag has two wings, to allow draping over light stand legs. Each side of the bag has a hand strap for...

K 6 Meking C standThis Meking C Stand Kit is comprised of a C-stand, 2.5" grip head and 40" extension arm. The stand features a patented locking mechanism that allows the legs to swing out and lock into place for easy setup and collapse flat for storage...

Product Information: The perfect addition to your studio lighting set-up, this compact, lightweight stand provides table-top stability for a range of lighting solutions used for a variety of film and photography activities. The strong plastic...

Meking M16-1226FS Boom Stand with Wheels Min Height: 1150mm/45"Max Height: 2260mm/89"Folded Height: 1500mm/59"Sections: 5Tube Diameter: 30, 35, 40, 45Max Payload: 5kg/11lbsFootprint: 1340mm/53"Maximum arm length: 2600mm/102"Meking M16-1226FS Boom...

Meking M-6 Boom Stand with Wheels Minimum height: 1490mm/59"Maximum height: 4080mm/161"Closed length: 1420mm/56"Net weight:18.8kg/41.4lbsSections: 5Column/Riser diameters: 25, 30, 35, 40, 45Legs: 25 x 25 mmMaximum Load:10kg/22lbsFootprint Diameter:...

Weight: 4kg Colour: Black Material: Cordura Nylon Made in New Zeealand The saddlebag design of this sandbag makes it ideal for draping over light stand legs that are supporting heavy gear, or battening down materials in windy and rainy conditions...

Key Features   This portable stand is ideal for times when you need your lights down low, real low.  The height is adjustable or you can place the spigot directly on the bottom leg so it is right on the ground.  Key...

PRODUCT HIGHLIGHTS Used for mounting lighting equipment and large variety of light shaping tools 2 Spring loaded legs to open in fixed positions Third leg is height adjustable by loosening a locking knob. Zinc alloy casting five times stronger than...

This is a wall mounted bracket so you can free up your floor space in a small studio area. You can adjust the length and the angle of this wall mount for a variety of applications. Maximum length: 120 cm Minimum length: 70 cm Maximum load capacity:...

SPECS Minimum height: 1350 mmMaximum height: 2900 mmFolded height: 1350 mmNet Weight: 7.10 kgSections: 3Maximum payload: 10 kgSPECS Minimum height: 1350 mmMaximum height: 2900 mmFolded height: 1350 mmNet Weight: 7.10 kgSections: 3Maximum payload: 10 kg

SPECS Minimum height: 1350 mmMaximum height: 2900 mmFolded height: 1190 mmNet Weight: 7.30 kgSections: 3Maximum payload: 10 kgSPECS Minimum height: 1350 mmMaximum height: 2900 mmFolded height: 1190 mmNet Weight: 7.30 kgSections: 3Maximum payload: 10 kg

Key Features: Detachable boom arm extendable to up to 217cm Attaches to standard light mount (5/8" spigot or baby pin) Sits on top of combo / studio / C-stands Compatible with continuous lights or strobes (flashes) Empty sandbag included...

Key Features: Detachable boom arm extendable to up to 220cm Attaches to standard light mount (5/8" spigot or baby pin) Sits on top of combo / studio / C-stands Compatible with continuous lights or strobes (flashes) Empty sandbag included...

SPECS: Minimum length: 550 mmMaximum length: 2100 mmCompact/folded length: 550 mmNet weight: 1.76 kgSections: 4Max payload: 2.5 kgSPECS: Minimum length: 550 mmMaximum length: 2100 mmCompact/folded length: 550 mmNet weight: 1.76 kgSections: 4Max...

This product is proudly brought to you by PHOTOGEAR.Premium quality ceiling rail system, extra heavy dutyCome with 2x fixed rails (3m) and 2x sliding rails (3m). (not the 3 sliding rails shown in the picture, additional rails can be purchased by...

370M ¦ALUMINUM STUDIO STAND 2 riser, 3 section Dia.45,40,35mm 1 leveling leg 1 extendable leg from 75 to 100 cm Black steel base, black anodized aluminum sections 370M │ALUMINUM STUDIO STAND 2 riser, 3 section Dia.45,40,35mm 1 leveling...

126cm Footprint Leg diameter: 22mmConvert Kupole into a standKupo - Kupole base is designed to convert Kupole to conventional stand whenever the ceiling is higher than 12' (3.6M) or a free-standing background is needed. The center base accepts 45mm...

This product is proudly brought to you by PHOTOGEAR.This is a small floor light stand,Made from aluminum,one stage of height adjustment,suitable for studio flash with large softbox attachments,Gloss black finish,Has wheels for easy movementMinimum...

Max height: 2.2m Max load: 1.04 kg Easy to use Great for travel Central pole can be detached and used as boom The Kupo Two-In-One Stand features a removable central pole which can be easily detached from the base and used as boom. The...

Aluminium construction 16mm (5/8") receiver 1/4'' & 3/8'' female thread The Kupo Multifunction Tray is built using lightweight and sturdy aluminium and comes with a 16mm (5/8") receiver and a 1/4'' & 3/8'' female thread which can fit to...

The Kupo Single Handed Stand features automatically collapsing legs which offer quick setup and easy repositioning. The ability to quickly pick up and put down a light stand without having to open and close the stand legs makes it easy and safe for...

Leak-proof Easy to use, carry and pack Maximum load weight: 4.55 kg The new solid construction of the Kupo Wrap & Go Shot Bag with non-slip strap design allows you to weigh down light stands by just wrapping around the stand base. The premium...

Leak-proof Easy to use, carry and pack Maximum load weight: 4.55 kg The new solid construction of the Kupo Wrap & Go Shot Bag 5lb/2.28kg with non-slip strap design allows you to weigh down light stands by just wrapping around the stand base. The...

Convenient Closure Sturdy Handle and Eyelet The Kupo 22.4lb/11kg Touch-Fastener Empty Refillable Sandbag is an indispensible safety measure on any set to ensure that stands don't tip over and damage expensive equipment and cause injury,...

Temporary Floor-to-Ceiling Support Spring Lock Expansion System Small Footprint Quick Lock Handle The 82.7" Kupole (Black Powder Coated) is a spring locking ceiling-to-floor or wall-to wall pole system with an adjustment range of 82.7...

Aluminum & Steel Four V-Shaped Jaws Handle With Roller Bearings Non-Slip Aluminum Friction Disc The 2-1/2" Grip Head With Big Handle from Kupo has four V-shaped jaws, an ergonomic oversized T-shaped handle with dedicated...

Maximum Load: 9 kg Twin Leg Braces Aluminum Construction 5/8" Top Stud The 12.5' Kupo Universal Stand is designed to hold loads up to 19.8 lb at a maximum working height of 151.6" using a 3 riser, 4 section design. The stand features...

The Kupo High View Stand is an aluminum stand with 5 risers, 6 sections and 3 leveling legs. Height 730 CMPayload 10kgsThe perfect tool for real estate, event, landscape and school photographers. Made from aluminium, the high view is light...

Maximum Load: 40kgs / 88.20 lbs 3.4m / 11' Height Leveling Leg Steel Construction Spring Cushioned Multiple Mounting Options The Kupo Master Combo HD Stand is designed to hold loads up to 40 kg at a maximum working height of 340 cm using a 2...

Load Capacity: 10 kg Maximum Height: 400 cm Sliding Leg Aluminum Construction Metal Knobs and Locking Collars 5/8" Stud Black Powder Coated Finish The black powder coated Baby Kit Stand with Square Legs from Kupo is a 13'...

Load Capacity: 5 kg Folded Length: 89 cm Weight: 1.3 kg Air-Cushioned 5/8" Stud This black-finished Midi Click Stand from Kupo is an air-cushioned stand that rises to a height of 8' while supporting 5 kg and weighing...

Minimum height: 1565mm/62" Maximum height: 4680mm/184" Contraction height: 1565mm/62" Net weight: 16.8kg/37lbsMinimum height: 1565mm/62" Maximum height: 4680mm/184" Contraction height: 1565mm/62" Net weight: 16.8kg/37lbs Section number:...

Product Name: MYA-3000 Minimum height: 990mm/39" Maximum height: 3000mm/118" Contraction height: 1000mm/39"Product Name: MYA-3000 Minimum height: 990mm/39" Maximum height: 3000mm/118" Contraction height: 1000mm/39" Net weight: 6.20kg/13...

Key Features: Extremely compact light stand with invertable legs Can sit flush to the floor for added stability Lightweight and portable Compatible with continuous lights or strobes (flashes) Double sided spigot also allows for devices...

Key Features: Heavy duty light stands Large base footprint for added stability Holds up to larger lights with accessories Compatible with continuous lights or strobes (flashes) Double sided spigot also allows for devices...

This product is proudly brought to you by PHOTOGEAR.This is a two in one light stand/boom.Specifications:Stand height : 140-492cm Stand height (Packed): 119.5cm Boom arm length is 110-215cmMax load bearing for this aluminium stand is 4KGAngle of...

Minimum height: 1450mm/57" Maximum height: 3450mm/136" Contraction height: 1450mm/57" Net weight: 6.70kg/14.8lbs Section number: 3 Diameter: 25.30.35. Foot tube diameter: 30 Bearing: 10kg/22lbs Packaging: 1pcs Support bottom diameter:...

- Min length: 54.5cm (21.46in.); - Max length: 160cm (63.19in.); - Weight: 330g. Product DescriptionDescription- Mounts Compact camera for self-shoot;- Four sections for extension use, Max length up to 160cm;- Each end with 1/4" male thread, can be...

Ultra-portable 7' light stand Folds down to a mere 19" Can be easily placed in gear bags, cases, and backpacks Brass 3/8"-16 head Weighs only 2.5 pounds Durable, sturdy construction Designed for the ultimate portability, this compact 7' light...

Key Features: Extends up to 60cm Folds down to 10.5cm Lightweight and portable Sits almost flush to the ground for added stability Compatible with continuous lights or strobes (flashes) Double sided spigot also allows for devices...

Flex arm 1/4" to 1/4"Flex arm 1/4" to 1/4"Net weight:0.38kg1 x Flex arm

...

M11-023 HookM11-023 HookNet Weight: 0.12kg 2 x M11- 023 Hook 4 x Bolts

Special order only. Please contact us to enquireTBCChrome plated steel stand. 3 sections, 2 risers. Ø: 35, 30, 25mm. Leg Ø: 25mm.Units: Metric Imperial attachment 01 1 1/8 (28 mm) Spiggot not threaded attachment 02 5/8 (16 mm) Spiggot not...

Primarily designed to hold grip products, the C-Stands are an effective way of articulating the item it supports using grip heads and arms. Available in a variety of heights and some with detachable columns, the Avenger C-Stands have a fast set up time...

Special order only. Please contact us to enquirePrimarily designed to hold grip products, the C-Stands are an effective way of articulating the item it supports using grip heads and arms. Available in a variety of heights and some with detachable...

Short Boom ArmShort Boom ArmNet Weight:0.94kg  Length:1.2m 1 x M11-033E C-Stand Boom Short Arm

Key Features 2 risers, 3 sections Dia.: 45mm, 40mm, 35mm Leg : 25mm x 25mm With 1 leveling leg Black: Powder Coated Steel Closed Length 143cm Maximum Extension (Height) 350cm Minimum Extension (Height) 139...

The KUPO Low Mighty Stand offers you superior strength without excess height.Working Height - 90-205cmPayload - 35kgsFolded size 92cmThe KUPO Low Mighty Stand offers you superior strength without excess height. When you need to position a...

 12 feet Grant Snap Stand with 3 risers, 4 sections ? Dia.35mm, 30mm, 25mm, 20mm ? Leg Dia. 22mm Aluminum die-casting riser and stainless heli-coil insert provides a durable thread hole. Aluminum die-casting knob with stainless steel bolt for a...

Weight: 12 kg Colour: Black Material: Cordura Nylon Made in New Zealand This sandbag can be a stabilizing force in your life. Its saddlebag design makes it ideal for draping over light stand legs that are supporting heavy gear, or battening down...

Weight: 6kg Colour: Black Material: Cordura Nylon Made in New Zealand This sandbag can be a stabilizing force in your life. Its saddlebag design makes it ideal for draping over light stand legs that are supporting heavy gear, or battening down...

Weight: 9kg Colour: Black Material: Cordura Nylon Made in New Zealand This sandbag can be a stabilizing force in your life. Its saddlebag design makes it ideal for draping over light stand legs that are supporting heavy gear, or battening down...

PRODUCT HIGHLIGHTS All-metal locking collars Steel construction Assembled with nuts and bolts Metal knobs 1-1/8" stud and receiver, 4-1/2" grip head Sliding leg Black powder-coated finish PRODUCT HIGHLIGHTS All-metal locking collars Steel...

PRODUCT HIGLIGHTS 9 feet Mighty Snap Stand with 2 riser , 3 sections Dia.35mm, 30mm, 25mm Leg Dia. 22mm 7 feet Mini Click stand with 3 risers, 4sections  PRODUCT HIGLIGHTS 9 feet Mighty Snap Stand with 2 riser , 3 sections Dia.35mm, 30mm,...

PPRODUCT HIGHLIGHTS The spring loaded clips make sure the fit is right, tight and secure. T-handle can be used as tool to assemble / disassemble the tube. Shot Bag is included 10 lb (4.55 kg). Can easily be disassembled to...

KCP-636B ¦BIG BOOM Length (when closed): 236cmMaximum Height: 363cmWeight: 15kgMaximum Weight: 6kg KCP-636B │BIG BOOM 2 sections: (dia. 45, 55mm) Material: Combination of black steel and aluminum tubes. *6kg at maximum extension. Big Boom...

Convenient Closure Sturdy Handle and Eyelet Ships empty – fill with your choice of weighty material (much lower shipping costs) The Kupo 13.2lb/6kg Touch-Fastener Empty Refillable Sandbag is an indispensible safety measure on any set...

Double-Sided Stud Fits into Any 5/8" Receiver The brass Universal Double-Sided Stud from Kupo has a baby 5/8" (16 mm) stud with 1/4"-20 male thread on one side and a 3/8"-16 thread on the other. The round stud will fit into any...

Supports 30kgsHeight 380cm Auto-locking Feature Leveling Leg Multiple Mounting Options The Kupo 3 Section Wind-Up Stand with Auto Self-Lock is the perfect combination of strength and safety. The crank handle raises a maximum load of...

Designed for mounting a small light instrument from a drop ceiling frame with the 5/8” (Baby) stud. Steel Construction This Kupo Baby Drop Ceiling Adapter with 5/8" Stud is commonly called a scissor mount and attaches to an...

For Mounting Lighting Equipment & Tools Two Telescoping Risers Zinc Alloy Casting on Base Fast & Easy Set-Up 2-1/2" Grip Head Hex Grip Arm with Big Handle The Kupo 30" C-Stand with Sliding Leg Kit is a 2 riser, 3 section (dia. 35mm,...