Lighting Grips

Key Features: Deity V-Mic D4 Mini 3.5mm Shotgun for Camera / Smartphone with Aux Input Sunwayfoto FL-120 LED Photography Fill Light Ulanzi PT-7 hot shoe extension bracket Ulanzi ST-02S Phone clamp with hot shoe mount - black Designed for Personal...

Key Features Ergonomic Handle Uses V-Mount Battery Battery Run Time: 100 Min at Full Power 5/8" Pin and 5/8" Receiver Nanlite Adapter Forza 60 for V-mount Batteries Overview The battery adapter works with the Forza 60 and offers an...

Key Features For Mounting Pavotube 15C and 30C Nanlite HD-T12-1-LA Overview Mount your Pavotube 15C or 30C to light stands and C-stands with the Pavotube Single T12 LED Tube Holder from Nanlite. This tube mount holder features two rubber-coated...

Key Features Converts a Elinchrom speedring mount into a Bowens mount Suitable for all Profoto Mount Studio Flash Strobe Easy to set up and strong enough   Material: Aluminum This mount allows you to fit a huge range of accessory from Bowens mount...

KEY FEATURES Fits Any 10-55mm Rod 2.5 kg Load Capacity Multiple 1/4"-20 Threads 1 x ARRI-Style Accessory Thread KEY FEATURES Fits Any 10-55mm Rod 2.5 kg Load Capacity Multiple 1/4"-20 Threads 1 x ARRI-Style Accessory...

Key Features 2-Pack of Universal Magic Arms Mount a Light, Monitor, Microphone Two Rotating Ball Heads Two 1/4"-20 Mounting Screws at Each End SmallRig 2158 Overview Use this Universal Magic Arm two-pack from SmallRig to mount...

Key Features Center Tightening T-Handle 3/8"-16 & 1/4"-20 Threaded Screws 360° Adjustment Range Load Capacity of 11...

Key Features:  Install 2x V-mount batteries 4pin Regulated 24V out, Max 240W 3pin Regulated 48V out, Max 500W 500W by SWIT Bi-voltage batteries For Skypanel S60/S120 100% output Neutrik XLR connectors 25-45mm light stand...

Key Features Joins Two Baby Studs Kupo Double Baby Receiver Adapter OverviewThis Double Baby Receiver Adapter from Kupo is an adapter that allows you to join two baby studs together. Kupo Double Baby Receiver Adapter...

KEY FEATURES ·       Safe Working Load: 200kg ·       Can Fit Tubes ? 48-51mm KEY FEATURES ·       Safe Working Load:...

Key Features:Ergonomically designed handlesMechanical interlocking designVersatile mini viser clampKupo KCP-660B Mini Viser Clamp Overview Mini version of Super Viser Clamp which features a 1/4''-20 thread female on the dia. 3/8’’ (10mm) knurled steel...

KEY FEATURES ·       35mm x 35mm Clamping Range ·       Aluminium Material Construction ·       5/8" Baby Receiver...

Umbrella Swivel Bracket is made of aluminum with 5/8”(16mm) receiver in both ends that can connect to stands or accessories with a baby pin to make aiming the light or flash...

KS-415 / BALL HEAD W/ 16MM BABY RECEIVER OVERVIEWThe KS-415 features a double socket arm and ball head in each end which allows it to lock the centre knob offers an ultra-versatile solution for mounting and positioning. Constructed from a die-cast...

2 1/2-inch grip head mounted on the end of a 50.8cm steel bar Rough non-slip surface Aluminium and steel construction with a silver machined steel finish Compatible with Kupo's Grip Arm Support (KG200912) The 50.8cm Grip Arm With Big Handle...

PRODUCT HIGHLIGHTS Accepts 5/8" Diameter Pin 8 Anchor Points PRODUCT HIGHLIGHTS Accepts 5/8" Diameter Pin 8 Anchor Points The Meking MB-14 is a handy accessory on any type of production set. All that's needed is a flat surface for its base...

PRODUCT HIGHLIGHTS 5/8" Diameter Pin 90-Degree Bend Extension 8 Anchor Points Hole in Pin for Safety Cable Mounts to Flat Surfaces PRODUCT HIGHLIGHTS 5/8" Diameter Pin 90-Degree Bend Extension 8 Anchor Points Hole in Pin for Safety...

PRODUCT HIGHLIGHTS 5/8" Diameter Pin 8 Anchor Points The Meking MB-11 is a 3" baby pin wall plate.PRODUCT HIGHLIGHTS 5/8" Diameter Pin 8 Anchor Points The Meking MB-11 is a 3" baby pin wall plate.3" Baby Pin Wall Plate Net weight: 0.46 kg

Key Features For Mounting Photo and Video Equipment All-Metal Construction 8.5" Threaded Steel Shaft 2.5" Center Jaw Westcott 1980 Overview The Center Jaw Vise Grip from Westcott provides strong, solid gripping of...

Overview This SmallRig 735 Super Clamp w/ 1/4" and 3/8" Thread is made of lightweight Aluminum Alloy. It mounts onto anything like cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. It can open MAX...

Key Features Fits Any 15-44mm Rod T-Shaped Locking Lever Anti-Slip Rubber Pads Inside Jaw 1/4"-20 and 3/8"-16 Threaded Holes SmallRig 2058 Overview Mount a camera, monitor, light, or other accessory on a rod system with...

PRODUCT HIGHLIGHTS Aluminium Alloy Construction For 40-50mm tubing PRODUCT HIGHLIGHTS Aluminium Alloy Construction For 40-50mm tubing ?40-?50mm Net weight: 0.50 kg

PRODUCT HIGHLIGHTS Fits and Snaps Into Super Clamp Holds Cross Bar for Background System Solid Aluminium Construction PRODUCT HIGHLIGHTS Fits and Snaps Into Super Clamp Holds Cross Bar for Background System Solid Aluminium...

Key Features Arm Holds Reflectors 72" Wide 5/8" Mount Westcott 5571 Overview Especially well-suited to solo shooters, the Illuminator Arm Extreme from Westcott is designed to hold reflectors, foam core, and...

Key Features Uses 2x Optional NP-F750-Type Batteries Provides 1 Hour of Full Power Run Time 5/8" Receiver Retractable Feet for Independent Support Nanlite BH-FZ60 OverviewFor image-makers in the field without access...

Large Sized Pony ClampLarge Sized Pony Clamp

Medium Sized Pony ClampMedium Sized Pony Clamp

Gross Weight: 0.08kgGross Weight: 0.08kg

Gross Weight: 0.16kgGross Weight: 0.16kg

PRODUCT HIGHLIGHTS Converts a Profoto speedring mount into a Bowens mount Suitable for all Profoto Mount Studio Flash Strobe Material: Metal & Plastic   PRODUCT HIGHLIGHTS Converts a Profoto speedring mount into a Bowens...

Special order only. Please contact us to enquireA 2-1/2 diameter grip head, designed to hold scrims, flags, etc. Designed with a non-slip T-Top grip pad that locks off securely, and washers for extra locking torque.Fits a 5/8" stud or stand top.A 2-1/2...

Special order only. Please contact us to enquireTBCBoom arms allow you to position your lights in the most difficult positions. Strong steel counterweighted for smoothness of operation and stability.attachment 01 5/8 (16 mm) Spigot not threaded Color...

M11-052 Meking Reflector Clamp The Meking Telescopic reflector Holder is adjustable, easy to swivel and rotate for precise position. The Holder extends from 36 to 67".The reflector Holder comes complete. It includes an extension arm, light stand...

Constructed of steel, and finished in black, this Meking 3.0" Baby Pin Wall Plate is a handy accessory on any type of production set. All that's needed is a flat surface for its base and optional screws to mount it to walls, ceilings or floors. It's...

This product is proudly brought to you by Photogear.M11-027B Meking Wall Plate 120mm receiverConstructed of steel, and finished in black, this Meking 120mm Baby Pin Wall Plate is a handy accessory on any type of production set. All that's needed is a...

This product is proudly brought to you by Photogear.M11-027A Meking Wall plate 60mm receiver Constructed of steel, and finished in black, this Meking 3.0" Baby Pin Wall Plate is a handy accessory on any type of production set. All that's needed is a flat...

This product is proudly brought to you by Photogear.M11-064 Meking Clamp with Ball Head This clamp from Meking is a spring loaded clamp with an adjustable ball head attached on top,This is a good solution to positioning flashes in unusual positions, The...

This product is proudly brought to you by Photogear.M11-066 Meking Spring loaded Clamp This is a multi purpose clamp for all your video and photographic needs,You can use it to hold props or light modifiers in place.Whats included,1x M11-066 Meking...

Key FeaturesPowerful metal spring clampRubber coating to prevent damageMount light-weighted accessoriesThis product is proudly brought to you by Photogear.M11-067 Meking Clamp with Spigot The spigot clamp allows you to mount accessories equipped with...

This product is proudly brought to you by Photogear.M11-035 Meking Grip Clamp The Meking Scrim Grip Head clamps onto Scrim Frame, then onto your stand. Once situated, the clamp may be loosened slightly to change the angle of the mounted scrim frame,...

This product is proudly brought to you by Photogear.M11-038 Meking G ClampThis clamp is unique as its a G clamp styled clamp with a 5/8 inch fixture ontop of the clamp, This fixture is useful as you can attach lights etc to the top of this clamp,What's...

This product is proudly brought to you by Photogear.M11-033D Meking Double Grip Clamp This Meking Double Grip Head is a combination of two joined 2.5" grip heads, mounted on a steel cube which can be attached to any standard lightstand fixture (5/8)...

This product is proudly brought to you by Photogear.The Meking Double Super Clamp features two Super Clamps that are screwed together to form a 90 degree angle. The Double Clamp is handy when used in pairs for mounting a length of pipe or an Alu-Core to...

This product is proudly brought to you by Photogear.M11-034 Meking Super ClampThe Meking Super Clamp with Handle is a versatile grip tool made of lightweight cast alloy. With a load capacity of 33 lb, the clamp can hold a wide variety of items such as...

This product is proudly brought to you by PHOTOGEAR.multi purpose clamp. comes in a range of different sizes. size range is 35mm (diameter) - 52mm, and the height range starts from 35mm to 52mmPackage includes:1x JB13-088 52mm-52mm ClampThis product is...

Grip arm, (or boom arm or gobo arm) for C stand is normally used in cooperated with a KCP-200, small flash head, moonlights, scrims and flag, to large tungsten The dia. 5/8'' arm is processed in matte finish increasing the friction when works with grip...

Titan Clamp PF-01Full Metal StructureGeared Thread LockingUniversal 1/4' Screw ThreadTitan Clamp Model: PF-01 Length:104mmWidth:72mmPlatform Diameter: 28mmLocking Width:0-55mmNet Weight:150gMounting Screw:UNC 1/4' -20Titan Clamp PF-01Full Metal...

This product is proudly brought to you by PHOTOGEAR.Two Light Bracket for Z180The F&V Two Light Bracket has two "-20 male threads for mounting two Z180 lights side by side. It also features a "-20 and 3/8"-16 female thread in the centre of the bracket...

PRODUCT HIGHLIGHTS Durable All-Metal Construction Quick, Secure Attachment PRODUCT HIGHLIGHTS Durable All-Metal Construction Quick, Secure Attachment As the name "Switch" hints, Westcott has introduced a line of softboxes designed for the...

This product is proudly brought to you by PHOTOGEAR.FLASH BRACKET LFeatures: The two L brackets can be dismantled and can be changed direction combination.There are standard(1/4) screw holes and screw heads in the long L bracket and 4 nuts are equipped...

M11-033A Meking Grip Clamp The Meking grip clamp is a unique double grip head that provides the flexibility of a second grip head, allowing hundreds of uses including doubling up scrims and flags.What's included,1x M11-033A Meking Grip ClampM11-033A...

PRODUCT HIGHLIGHTS Built by heavy-duty gravity casting designed for rigging on pipe with diameters from 25mm (0.9’’) ? 55mm(2.1") Features an unique quick action locking device which allows to Tighten or loose the knob just in a snap...

This product is proudly brought to you by Photogear.M11-054A Mekin 3 cold shoe flash adapter This allows you to gang 3 lightweight shoe mount flashes for use in a softbox or umbrella. Most speedlites in this category output about 60W/s, but with the...

The C-47, or common wooden clothespin is probably the lightest weight and most inexpensive “clamp” you will ever find on set. The primary function of C-47’s is to attach gel filters to the barn doors of hot lights. Wood is a good...

PRODUCT HIGHLIGHTS Features a 5/8’’ ( 16mm ) baby stud instead of 3/8’’ (10mm) shaft for connecting with lightweight lighting Fixtures and any Accessories with 5/8’’ (16mm) baby receiver. A 1/4’’-20...

Quick Overview The Tungsten Diffusion Filter for the R-300 LED Ring Light. Not only does this offer beautiful, wrapping light, but also the thick diffusion makes it much easier for your talent to look in the direction of the light. Simply snap...

The Godox AD200 Twin Head Bracket will combine two Godox AD200 strobes into a single 400Ws light source, with Bowens S-type mount, and dual unobstructed LED modelling lights!Turn your Godox AD200 Pocket Flash into the next level of intelligent strobe...

Kupo aluminum made Camera Support Adapter provides a great supporting solution for camera with built-in hot shoe. It features a 15 cm length 5/8’’ (16mm) baby stud which offers an ample space for mounting two grip heads to connect with extra...

Fit tube Ø 48-51 mm Equipped with a 16mm (5/8’’) socket  for lighting fixing accessories.Fit tube Ø 48-51 mm Equipped with a 16mm (5/8’’) socket  for lighting fixing accessories.

Fit tube Ø 48-51 mm Equipped with a 16 mm (5/8’’) stud for lightweight luminaires. Maximum Holding Weight: 100kgFit tube Ø 48-51 mm Equipped with a 16 mm (5/8’’) stud for lightweight luminaires...

Standard VESA Mount with Ball Joint75x75mm and 100x100mm HolesMade by sturdy aluminum mounting plate is great mounting solution for your monitor. Standard VESA mounting holes pattern for 75 x 75mm and 100 X 100mm are ready to assure mount...

Kupo KS-406 Hex Stud Ball Head for KCP-700 Hex Stud Ball Head:   Designed for use with KCP-700 Kupo KS-406 Hex Stud Ball Head for KCP-700 Hex Stud Ball Head:   Designed for use with KCP-700 1 x Kupo KS-406 Hex Stead Ball...

Double Ball Joint8kgs Payload1/4"-20 Screw and baby stud socket mountingSuper knuckle features double socket arm and ball head in each end which allows lock positively with centre knob offers an ultra-versatile solution for mounting and positioning...

Kupo's drop ceiling adapter with female socket is commonly called a scissor mount and attaches to an intersection in the metal grid that supports ceiling tiles.Kupo's drop ceiling adapter with female socket is commonly called a scissor mount and attaches...

The Grip Helper is constructed from a junior (29mm) receiver on the end of a 45 degree angle arm which can extended from 90 cm to 180 cm and a 4.5'' Griphead on the other. Designed for a scrim, silk or blackout can be used with a lighting fixture...

Metal ratcheted handle for easy slight adjustment Anti-Slip rosettes friction disc design offers a solid grip Storage length is 28.5cm and fully extend to 53cm Weight - 1kg - compact and portableThis is especially-designed articulated arm with a camera...

PRODUCT HIGHLIGHTS For Boltzen B-30 & F-55 Series Lights PRODUCT HIGHLIGHTS For Boltzen B-30 & F-55 Series Lights The small Bowens Mount Ring Adapter from Came-TV allows you to use Bowens light modifiers on Boltzen B-30 and F-55 series video...

This product is proudly brought to you by PHOTOGEAR.Made of Aluminium alloy, durable and suitable for all kinds of photography table. One side of the clamp can be used to hold paper card board / reflector panels.Package included:1x Meking M11-060...

This product is proudly brought to you by PHOTOGEAR.This listing is for 1x Elinchrom adapter only,Adapter ring for use with the Multi-adapter accessory range of softboxes, snoots and beauty dishes. Enables the accessory range to be attached to a large...

This product is proudly brought to you by PHOTOGEAR.Solid aluminum construction Powerful clamps20cm of flexible armIdeal for holding up a reflector board on product photography tableThis product is proudly brought to you by PHOTOGEAR.Solid aluminum...

Made from machined aluminum with black anodized finish with a 3/4’’-5 TPI female threaded allows to be mounted on most painter’s pole. The 1/4’’-20 screw made from stainless steel equipped on the other side is designed for...

The Kupo Flag Holder is designed to fit on KCP-345 Flex arm. It is made from zinc casting material with M6 thread. The Kupo Flag Holder is designed to fit on KCP-345 Flex arm. It is made from zinc casting material with M6 thread. 

Mounts to C-Stand Riser Sections 5/8" Male Pin & 5/8" Female Receiver Able to attach easily to a C-stand's riser section, this Sidearm with Baby Pin/Receiver from Kupo will let you mount equipment at any point on your stand...

The Kupo Bubble Level Clamp for Tubes 40-45mm is designed for use on Kupole or tubes of 40–45mm diameter. The Kupo Bubble Level Clamp for Tubes 40-45mm is designed for use on Kupole or tubes of 40–45mm diameter...

The Kupo Super Frip Finger with 5/8" Baby Receiver is designed to mount lighting fixtures or accessories onto the baby swivel pin and angle it in any direction. Unique ratcheting handle allows all axis to lock positively with one locking handle...

PRODUCT HIGHLIGHTS For Seamless/Fabric without Solid Core Can Be Use as Crossbar This Aluminum Tube for Paper Roll from Kupo is designed for use with paper or fabric that doesn't have a solid interior running through it. This...

Mounts Around Tubing Sized 1.4-2.0" Four Recessed Mounting Points Aluminum Construction Supports Loads up to 66 lb (30 kg) The 4-Way Clamp from Kupo is designed to mount quickly around any tubing measuring between 1.4 inches and...

Mounts Around Tubing Sized 1.0-1.4" Three Recessed Mounting Points Aluminum Construction Supports Loads up to 66 lb (30 kg) The 3-Way Clamp from Kupo is designed to mount quickly around any tubing measuring between 1 inch and 1...

PRODUCT HIGHLIGHTS 13.2 lb Load Capacity Aluminum Construction 1/4"-20 and 3/8"-16 Taps Rubber-Padded Jaws The Super Claw from Kupo is a scaled-down, lighter weight (4.6 oz) version of the popular Convi Clamp. Ideal for...

PRODUCT HIGHLIGHTS Steel and Aluminum Construction 66.1 lb Load Capacity 5/8" Receiver and 5/8" Stud The end jaw, 9" Super Viser Clamp with Hex Receiver from Kupo is a strong and versatile clamp. It can mount securely onto round...

The Kupo 40" Super Grip Arm offers an excellent mounting solution for precise placement of lights over obstructions or awkward positions. It is built with a 40" steel extension arm terminated with hex baby stud and equipped with a Super Grip Finger, a...

PRODUCT HIGHLIGHTS Baby Hex Pin Connection Non-Slip Surface With a silver machined finish, the Kupo 40" Hex Grip Arm with Big Handle has a 2-1/2" grip head mounted on the end of a 40" piece of steel tubing, which is 5/8" (16mm) in diameter...

The Kupo Pivoting Light Stand Boom Clamp is designed for mounting a boom arm to a heavy duty stand. Constructed from solid aluminium, the clamp can tilt and swivel to adjust to the boom arm quickly and simply with a metal racheted handle. There are...

Lightweight Telescopic Arm Aluminum & Steel The Grip Arm Support from Kupo is a lightweight telescopic arm with a Kupo Tiny Clamp on one side designed to attach to the 5/8-inch steel grip arm and a unique threaded stud notched...

PRODUCT HIGHLIGHTS Aluminum & Steel Four V-Shaped Jaws Handle With Roller Bearings Non-Slip Aluminum Friction Disc  The 2-1/2" Grip Head With Big Handle from Kupo has four V-shaped jaws, an ergonomic oversized...

Constructed by two Hybrid Heads and an aluminum tube (dia.13 mm, 1.1 mm thickness and 28.5 cm length) with matt black anodized. Each Mini Grip Head equipped the baby pin with multi-milling flats that can fit into baby socket fast and hold object...

Adjustable Aluminum Arm Two Studs Attached to Ball Joints Central Elbow Rotates 360° Quick, Easy Positioning Kupo's Max Arm is an adjustable aluminum arm that consists of two studs attached to ball joints at the ends and a central elbow...

Key FeaturesTelescopic Reflector HolderEasy to swivel & rotateRange from 80cm to 184cmThis product is proudly brought to you by PHOTOGEAR.This Telescopic Reflector Holder is adjustable, easy to swivel and rotate for precise positionIt can be either...

This product is proudly brought to you by PHOTOGEAR.You can be really creative with this bracketBoth arms can fold in for easy storageor fold vertically (as photo shows)or completely unfold to 180 degreesIt can be tripod mounted when carrying both the...

Selens mounting arm with bowens speedring to be used with Selens deep parabolic softboxes.Selens mounting arm with bowens speedring to be used with Selens deep parabolic softboxes.

Selens Speedring & Bracket for Bowens mount, this is ideally to be use in combination with Selens Deep parabolic softboxesSelens Speedring & Bracket for Bowens mount, this is ideally to be use in combination with Selens Deep parabolic softboxes

Key Features Can be set on tripods with 3/8 "screw Arm can slide left or right, giving you creative control Can hold two cameras, camera and monitor, or other accessories Teleskoparm can be extended to 77cm Max. length: 77 cm Length in collapsed...

This Nanguang adapter allows you to mount soft boxes, snoots, barndoors and other accessories with a Bowens mount on the Nanguang CN-100F LED Fresnel.This Nanguang adapter allows you to mount soft boxes, snoots, barndoors and other accessories with a...

Key Features: Fits onto a regular light stand mount (5/8" socket) Allows mounting of speedlites/on-camera flashes Also allows mounting of umbrellas onto the adapter 2-in-1 solution for mounting both umbrellas and flashes The M11-05 series...

This Nanguang adapter allows you to mount soft boxes, snoots, barndoors and other accessories with a Bowens mount on the Nanguang CN-60F LED Fresnel. This Nanguang adapter allows you to mount soft boxes, snoots, barndoors and other accessories with...

Grip Clamp M11-033H Net weight:0.93kg Material: Alu Height: 500mm Color:Sliver Grip Clamp M11-033H Net weight:0.93kg Material: Alu Height: 500mm Color:Sliver Grip Clamp M11-033H Net weight:0.93kg Material: Alu Height:...

This product is proudly brought to you by PHOTOGEAR.The Flash Bracket features both a 1/4 -20 male thread for the attachment of a camera and a cold shoe mount for the mounting of a flash or a variety of applicable camera accessories. Both the cold shoe...

- This Q-type clip is designed for hanging battery pack, installing different flashes with lamp adapter(sold separately), etc High quality material with strong bearing Several 1/ 4 and 3 / 8 bracket mounting holes to adjust light ankles flexibly...

This grip head fits the top of your heavy duty stand, and clamps to a Westcott Scrim Jim, or most any other panel reflector frame.This grip head fits the top of your heavy duty stand, and clamps to a Westcott Scrim Jim, or most any other panel reflector...

PRODUCT HIGHLIGHTS Mounts Flex to Stands, Chairs, Tables Easy-to-Use Mounting Clip Light Stand Adapter & Bracket Adjustable Diffusion Arms Reflection-Free Black Finish Durable, Lightweight Design PRODUCT HIGHLIGHTS Mounts Flex to Stands,...