Overview
The BY-XM6 K1 comes equipped with a portable yet powerful charging case, which makes it can be easily carried outdoors. With the built-in powerful battery, the charging case enables both the receiver & transmitter to be fully charged at the same time, without any cable required. Furthermore, The power indicator on the charging case allows the battery capacity as well as charging status can be easily checked.
Advanced Technology for Stable Signal Transmission
The BY-XM6 K1 adopts advanced Adaptive Frequency Hopping (AFH) wireless signal transmission technology, which can make the microphone avoid the disturbed hop frequency parts automatically to realize stable signal transmission in the range of up to 100m (328ft), without obstacle.
Professional Audio Capturing & Delivering
Featuring a high-quality capsule, signal processing circuit with a signal-to-noise over 84dB as well as a distortion rate less than 0.1%, the microphone captures meanwhile delivers high-quality , clear & low-noise audio.
Ultra-versatile & Ease-to-use Wireless Microphone Kit
With vivid & easy-to-read OLED display on transmitter and receiver, users can adjust the signal transmission precisely. Moreover the transmitter is also designed with a built-in omnidirectional microphone, so users can clip the transmitter on the collar to pick up sounds, while they can also plug a lavalier microphone into transmitter’s MIC IN jack for sound capturing. Plus, this microphone kit is equipped with both 3.5mm TRS-TRS audio cable as well as a 3.5mm TRS-TRRS audio cable. So it can work well with your DSLR or mirrorless camera, smartphone or computer etc.
The BY-XM6 K1 comes equipped with a portable yet powerful charging case, which makes it can be easily carried outdoors. With the built-in powerful battery, the charging case enables both the receiver & transmitter to be fully charged at the same time, without any cable required. Furthermore, The power indicator on the charging case allows the battery capacity as well as charging status can be easily checked.
Specifications
TX Transmitter
Transmission Type | 2.4GHz Digital Frequency |
Modulation | GFSK |
Operating Range (without obstacle) | Up to 328ft (100m) |
RF Output Power | <10mW |
Polar Pattern | Omnidirectional |
Frequency Response | 50Hz-18KHz |
Maximum SPL | Built-in Microphone: 120dB SPL |
Lavalier Microphone: 110dB SPL | |
Sensitivity | Built-in Microphone: -39dB |
Lavalier Microphone: -39dB | |
SNR | > 84dB |
Power Requirements | Built-in Li-ion Battery or USB-C DC 5V or Charging Contact |
Built-in Battery Life | Approx. 7 hours |
Antenna | PIFA Antenna |
Audio Inputs | 3.5mm TRS MIC/LINE IN Jack or Built-in Microphone |
Weight | Approx. 32g(1.13oz) |
Dimensions | 62.1×31.6×16.5mm |
Operating Temperature | –10°C to 50°C |
Storage Temperature | –20°C to +55°C |
RX Receiver
Transmission Type | 2.4GHz Digital Frequency |
Modulation | GFSK |
Operating Range (without obstacle) | Up to 328ft (100m) |
Audio Output Connector | 3.5mm Headphone Jack |
3.5mm TRS Output Jack | |
Audio Output Level | –60 dBV to -20dBV |
Power Requirements | Built-in Li-ion Battery or USB-C DC 5V or Charging Contact |
Built-in Battery Life | Approx. 6.5 hours |
Antenna | PIFA Antenna |
Weight | Approx. 32g(1.13oz) |
Dimensions | 62.1×31.6×16.5mm |
Operating Temperature | –10°C to 50°C |
Storage Temperature | –20°C to +55°C |
charging case
Power Requirements | USB-C DC 5V/1.5A |
Power Capacity | 2000mAh |
Box's Charging Time | 3 hours |
Weight | 152g |
Dimensions | 96x96.8×35.6mm |
Operating Temperature | -10°C to 50? |
Storage Temperature | -20°C to +55? |
- Barcode: 61722
- Supplier Code: BY-XM6-K1