Teradek Cube Series Overview
The Teradek Cube 675 H.264 HD Decoder is a compact H.264 decoding solution that is useful on set and in the studio for receiving compressed video signals. On set, the Cube 675 can be connected to an HDMI or SDI monitor for a live feed coming in from your IP network. Alternately, the Cube 675 can be used in a remote studio location as a receiver of a point-to-point IP stream over Ethernet, Wi-Fi, or USB modem. Wi-Fi and direct Ethernet connectivity make the Cube 675 a versatile option for productions requiring real-time decoding.
Teradek Cube Series Specs
Video
| Video Outputs | 1 x HDMI type A, v1.4a 1 x BNC, SD/HD/3G-SDI |
| Supported Resolutions | 1080p 23.98/24/25/29.97/30/50/59.94/60 1080PsF 23/24/25/29/30 1080i 50/59.94/60 720p 50/59.94/60 576p (HDMI only) 480p (HDMI only) NTSC PAL |
Video Processing
| Video Compression | Decodes H.264: Baseline, Main, and High Profile |
| Bit Rate | 250 kbps to 15 Mbps (10 Mbps wireless) |
| Format Conversion | Built-in video scaler and deinterlacer |
Protocol Support
| Network Protocols | TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP |
| Transport Protocols | RTP/RTSP: Unicast/TCP, Unicast/UDP, Multicast/UDP MPEG-TS: Unicast/TCP, Unicast/UDP, Multicast/UDP Teradek Streaming: Unicast/UDP, Multicast/UDP |
| Remote | Teradek Core |
Audio
| Audio Compression | AAC-LC, MPEG Layer 2 |
| Audio Input | Analog line or mic in, adjustable gain |
| Audio Output | SDI/HDMI embedded audio output 1 x 3.5mm stereo headphone |
Interfaces
| Configuration | Configuration Interface: OLED display with joystick navigation buttons, WebUI |
| Switches | On/Off and Reset switch |
| App Control | Web UI for configuration and control |
| USB Interface | Powered USB 2.0 host port |
Network
| Ethernet | 10/100/1000Base-T Gigabit |
| Wireless | Wi-Fi: 2.4/5 GHz 802.11a/b/g/n MiMo |
| RF Channels | Auto with 3 Modes: (2.4 or 5 GHz), Auto (2.4 GHz only) Auto (5 GHz only) Configurable to specific channels |
| Encryption | 802.1x, 802.11i, WPA2, WPA and WEP 64/128 TKIP 128-bit AES |
| USB | USB 3G/4G modem support |
Power
| Power Input | 2-pin connector, 6 to 28 VDC |
| Power Consumption | Nominal: 7 to 8 W |
| Compliance | FCC, CE, IC, RCM |
Physical
| Dimensions | 4.75 x 3 x 1.1 / 12 x 7.6 x 2.8 cm |
| Weight | 11.6 oz / 329 g |
Packaging Info
| Package Weight | 2.29 lb |
| Box Dimensions (LxWxH) | 6.8 x 6.45 x 4.85" |
- Teradek Cube 675 H.264 HD Decoder
- AC Adapter
- Ethernet Cable
- SDI Cable (10")
- HDMI Cable (18")
- 2 x Wireless Antennas
- Barcode: 42941
- UPC Barcode: 818264020456
- Supplier Code: 53.10-0675