Wooden Camera Panasonic BGH1 Unified Accessory Kit (Pro, Gold Mount)

Protect and add accessories to your Panasonic LUMIX BGH1 for pro-style video capture with this Camera Cage from Wooden Camera. The camera mounts into the cage with two bottom screws, and the cage protects your camera while maintaining access to controls and ports on all sides. Accessories can be mounted around the cage using the 1/4"-20 and 3/8"-16 threads as well as threads that feature ARRI-style anti-twist locating holes.

On the top, there is an Arca-type slot and dovetail plate that facilitates top-mounting the camera on a gimbal or stabilizer system. There is also a NATO rail on the side of the cage to add an optional handgrip, extension arms, or other accessories. A pass-through slot on the side allows you to easily manage your cables.

Simplify using your camera with cine-style accessories with this Wooden Camera Lightweight 15mm Baseplate for the Panasonic LUMIX BGH1 camera. Featuring an Arca-type-compatible plate that you mount your camera on, this then slides into the top of the baseplate, which has two integrated 15mm rod clamps that provide the correct rod center to lens mount center and height. They also comply with the LWS standard for your cinema-style lens accessories, such as available follow focus units, lens control motors, and matte boxes.

The baseplate has a machined dovetail on the bottom, making it compatible with ARRI standard dovetail plates, and a built-in locking lever clamps the baseplate onto the dovetail plate to secure your camera. An included quick dovetail plate conforms to the ARRI dovetail standard, allowing you to mount it to a tripod head or other support platform and then mount the baseplate to that, enabling you to use this system with a standard tripod without having to source additional components.

The 12" Safety Dovetail Plate from Wooden Camera is an ARRI standard dovetail with a stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. It features threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment. The dovetail can be attached to a shoulder pad for custom handheld configurations.

Add a high-capacity battery plate to power your Panasonic BGH1 rig with this compact Micro Battery Slide from Wooden Camera. It supports one Gold mount battery while leaving access to the camera's standard battery compartment, and it powers the camera using the included 3-pin LEMO-type connector cable. With the camera's AG-VBR59 battery in place, hot swapping is supported.

The compact battery slide mounts onto a rig using its integrated 3/8"-16 mounting screw. It also features two 5.8V D-Tap outputs for powering accessories. The D-Tap accessory outputs feature a digital fuse that monitors each D-Tap port and disables it if it exceeds the set current for accessories, leaving the camera running without interruption. Once the load has been reduced by removing accessories, a reset button can be pressed to enable accessory power again.

This is a single, 12" long 15mm Support Rod from Wooden Camera for mounting accessories. It is chamfered at each end to ease sliding accessories on and off, and has a hollow interior providing for maximum strength.