Sachtler System Cine 20 HD CF MS
The CF 100 ENG HD 2CF Mid-Level Tripod System with Cine 20 Fluid Head from Sachtler pairs the Cine 20 fluid head and the carbon fiber CF 100 ENG HD 2CF tripod legs with a mid-level spreader. This kit offers a fluid head 48 lb payload for midsized camera rigs, as well as a sideload camera plate, 16 steps of counterbalance, and seven steps of pan/tilt drag. Carry the system with the included handle and bag for easy transport to the set.
Sachtler Cine 20 Fluid Head (100mm Bowl)
Designed to support small to midsized camera rigs, the Sachtler Cine 20 Fluid Head has a load capacity range of 4 to 48 lb. This fluid head features 16 steps of counterbalance and seven steps of pan and tilt drag adjustment. A total tilting range of 170° makes framing your shots a breeze. Balance your rig on the fluid head using the sliding plate, which can adjust along 5.9" with SpeedBalance technology. The 100mm bowl diameter is compatible with various carbon fiber Sachtler tripods like the flowtech 100. Easily attach and detach your camera via the Sideload platform. An illuminated bubble level and telescopic pan handle make for intuitive adjustment.
Sachtler CF-100ENG HD 2CF Carbon Fiber HD Tripod Legs
The CF 100 ENG HD 2CF two stage, heavy-duty tripod, provides maximum stability and carrying capacity. Constructed and drawn out of one-piece of carbon fiber material, it is twist resistant and lighter than dural aluminum. It features a 100mm / 4" bowl, tube diameter of 24mm (0.94") for extra stability, and is fitted with the Sachtler quick clamping system, so you can securely - and visibly - lock the tripod.
The CF 100 ENG HD 2CF's double extension provides greater stability, allowing an extended height range with a payload of 210 lb., and with a weight of only 9.5-lb it's lightweight, solid and stable. Spreader and feet are not included.
- Heavy-duty carbon fiber construction with 22mm (0.87") tube diameter
- 100mm / 4" bowl base
- Double extension design
- Maximum height of 61.8-inch
- Quick clamping system, locks tripod legs in seconds
- Supports up to 210 lb.
- Built-in transport safety cord, preventing the legs from opening while in transport
- Folding tripod handle, for comfortable carrying of tripod in horizontal position
- Sachtler Mid-Level Spreader for Select 100/150mm Tripod Legs
This Mid-Level Spreader for Select 100/150mm Tripod Legs from Sachtler fits all 100 and 150mm bowls except for flowtech, DA 100 K, DA 150 K, and Cine tripods. It is used when shooting on uneven surfaces such as steps, rocky ground, or slopes. It allows for rapid setup and pulldown by keeping tripod legs at an equal or preset distance relative to each other. It attaches to the center bracket of a tripod and its arms are telescopic to allow for the extension of a tripod leg without detaching the spreader.
Sachtler Rubber Feet (Set of 3)
Set of three Sachtler Rubber Feet. Snap these feet onto your tripod when it's not possible to use the dual spiked feet, ideal on slippery and glossy floors. For all Tripods with Off-Ground Spreaders (Except OB-2000/M and Cine 2000/M tripods).
Sachtler 3373 Front Pan Bar HD S
The Sachtler 3373 Front Pan Bar HD S is a pan bar for the Cine 7+7 HD fluid head. This bar is unique, as it fits on the front of the fluid head. This allows for better control with heavy loads under specific shooting conditions.
Sachtler ENG/EFP Padded Bag
The Sachtler ENG/EFP Padded Bag is a soft tripod bag designed to carry various Sachtler tripods with fluid heads up to 37 inches long. The case can be carried by the interlocking handles or the attached shoulder strap.
Soft padded tripod carry bag, Carried by interlocking handles or attached shoulder strap. Compatible with;
- Sachtler DV 8 with 100mm ball, DV 12, DV 15, Video 15, Video 18, Video 20 fluid heads on 100 mm long, 100 HD, Hot Pod tripods
- Sachtler DV 8 with 100mm ball, DV 12, DV 15, Video 15, Video 18, Video 20 fluid heads on ENG 2 HD, Speed Lock CF HD tripods
- Sachtler Horizon Plus and Video 25 Plus fluid heads on 2-fold extension EFP 2 tripods
