Godox iT32 TTL Mini Flash with X5Cm TTL Wireless Flash Trigger for Canon (Multi-Function Shoe)

Overview

The Godox iT32 TTL Mini Flash with X5Cm TTL Wireless Flash Trigger for Canon (Multi-Function Shoe) bundles Godox's compact, versatile iT32 mini flash with the X5Cm trigger, giving you a complete on- and off-camera TTL flash system for Canon cameras straight out of the box. The iT32 offers TTL, Manual, and Multi flash modes alongside Godox's 2.4 GHz X wireless system, while the included X5Cm adds a hot shoe connection and wireless flash triggering for compatible Canon cameras.

Adjustable output from 1/128 to 1/1 power, a 1.5 second recycling time, HSS support, a colour touchscreen, and an LED modelling lamp give precise control over lighting. The built-in USB-C rechargeable battery delivers up to 510 full-power flashes, all in a lightweight 170 g body.

Godox X5Cm Wireless Trigger

The included X5Cm trigger attaches to the iT32 via a magnetic interface and rotating locking ring, then mounts to your Canon camera's Multi-Function Shoe, with no adapter required for on-camera use, or detaches to trigger the iT32 wirelessly from up to 20 m away. It runs on its own internal 3.8V, 100mAh rechargeable battery.

Effortless Wireless Sync

Removed from the iT32 and mounted to a camera's hot shoe, the X5Cm trigger wirelessly controls select settings up to 20 m away. Used together in iT32+X5 mode, the pair can sync trigger other Godox flashes up to 80 m away, acting as a master unit for flexible multi-flash setups.

Colour Touchscreen and LED Modelling Lamp

An intuitive colour touchscreen and simplified buttons make operation straightforward, while the LED modelling lamp supports brightness adjustments from level 1 to 10.

Compact Body with Included Accessories

The iT32 is a compact 10.2 x 5.6 x 3.8 cm flash with a transparent wide-angle diffuser, a white catchlight panel, a photocell sensor, and a sync cord port. Firmware updates and charging are handled via USB-C. In the box are a USB-C charging cable, a magnetic mini stand, a diffuser, two magnetic colour filters, and a storage bag.

Compatibility:

This kit pairs the iT32 with the X5Cm trigger, giving you native, adapter-free hot shoe mounting and wireless flash triggering for Canon cameras with the Multi-Function Shoe: R1, R3, R6 Mark II, R7, R8, R10, and R50. For Canon cameras with a standard hot shoe, choose the iT32 + X5C kit instead.

Additional Benefits

• The iT32 automatically identifies which X5 trigger version is attached.
• A battery level indicator on the iT32 shows the remaining charge at a glance.
• Supports S1/S2 optical slave modes.
• Stroboscopic flash mode fires up to 100 times, with an output range from 1/128 to 1/4.
• TCM conversion is available in Wi-Off mode.
• Standby and auto-off settings help conserve battery life.
• HSS support and second-curtain sync availability can vary by camera model.
• Built-in over-temperature protection.
• The X5 trigger has no power on/off switch; it uses colour indicators instead.
• The X5 trigger's own battery status can be viewed via the iT32 menu.
• The X5 trigger reaches a full charge in approximately 3 hours when attached to the iT32.
• The X5 trigger discharges from a full battery in approximately 16 hours.