The C500 Mark II Recoil Pro from Zacuto is a shoulder rig designed specifically for the Canon C500 Mark II camera. It includes a VCT Pro Baseplate, a dedicated Top Plate, a Rosette Trigger Grip, and a Recoil Handle. This rig balances directly over your shoulder, putting your camera body behind the shoulder and relocating focus, monitoring, and camera controls forward to create a lighter, shorter, and properly balanced rig.
Zacuto VCT Pro Baseplate
With built-in ergonomic shoulder pad, 10" sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish VCT Pro Baseplate from Zacuto. Use it with all types of cameras, from DSLRs to larger models, like the Alexa.
A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1", and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8" riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.
The VCT Pro Baseplate features a 10" sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.
An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4"-20 threaded holes on the side providing additional mounting options. 1/4"-20 and 3/8"-16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5" 15mm rods are included. One 1/4"-20 and one 3/8"-16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.
Key Features
Key Features
- Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
- 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
- VCT14-compatible V-wedge
- 1/4"-20 and 3/8"-16 tripod mount holes
- Ergonomic gel polymer shoulder pad
- 15mm LWS rod adapter on the rear
- Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
- ARRI M6 rosette
- Three 1/4"-20 threaded holes for accessories
- Includes two 6.5" 15mm rods
- 1/4"-20 and 3/8"-16 screws supplied
- Made in the USA
Zacuto Rosette Trigger Grip
The Zacuto Rosette Trigger Grip is an adjustable grip relocator for ARRI rosette-mount camera or lens grips. It's designed to attach to camera supports offering an ARRI rosette, including the Zacuto VCT Pro baseplate. The entire unit can be rotated a full 360° at the quick press of a lever, and the component that holds your grip can be adjusted forward and backward with the press of another lever. Unlike with standard handgrips, these levers don't need to be unscrewed and can just be pressed on the fly. The entire unit can also be adjusted in length by loosening another lever.
Zacuto Canon C500 Mark II Top Plate
The dedicated Canon C500 Mark II Top Plate from Zacuto attaches to the top of your C500 Mark II camera body. It features an integrated Z-Rail that enables you to slide an attached handle forward and backward for improved balance. This plate incorporates a single 15mm rod bracket and a grooved mount for the C500 Mark II LCD.
The C500 Mark II Top Plate also features multiple 3/8"-16 and 1/4"-20 threads, as well as ARRI-style anti-twist mounts for attaching accessories.
Key Features
Features
- Integrated Z-Rail
- Single 15mm rod bracket
- Enables forward and backward top handle adjustment
- Multiple 3/8"-16, 1/4"-20, and ARRI-style threads
Zacuto Recoil Handle
The Zacuto Recoil Handle is a maple-wood-lined handgrip that mounts to a Z-Rail or compatible mounting rail. This provides a comfortable yet secure handle for your camera rig, and the rail-style mounting allows you to adjust the handle along the length of the rail to improve your rigs balance. It features two cold shoe mounts (one vertical and one horizontal) and secures both mounts with a single lever. The integrated 1/4"-20 threaded mounting hole, and 15mm rod clamps further expand on the Recoil Handle's usefulness.
Machined aluminum construction provides a balance of strength and weight, and the unit is anodized for corrosion and wear resistance. Large, spring-loaded locking levers provide a good grip and the capability of tightening the clamps without rotating the levers throughout the entire 360° range.
Key Features
-
Zacuto VCT Pro Baseplate Specs
Mount Types VCT14-compatible V-wedge
15 mm LWS rod ports in front and back
1/4"-20 and 3/8"-16 tripod mount holes
1/4"-20 and 3/8"-16 camera screws included
6.5" (16.5 cm) 15mm rods included
ARRI M6 rosette
Three 1/4"-20 threaded holes for accessoriesDimensions 14.25 x 4.25 x 2" (36.2 x 10.8 x 5 cm) (with included 6.5"/16.5 cm rods) Weight 2.1 lb (0.96 kg) Packaging InfoPackage Weight 2.85 lb Box Dimensions (LxWxH) 11.7 x 10.4 x 7.8" Zacuto Rosette Trigger Grip Specs
Packaging InfoPackage Weight 1.14 lb Box Dimensions (LxWxH) 9.1 x 4.85 x 2.8" Zacuto Canon C500 Mark II Top Plate Specs
Accessory Mount Threads Multiple: 3/8"-16, ARRI-Style Anti-Twist, 1/4"-20 Rod Compatibility 15 mm Dimensions and Weight Not Specified by Manufacturer Packaging InfoPackage Weight 0.42 lb Box Dimensions (LxWxH) 6.65 x 4.25 x 0.75" Zacuto Recoil Handle Specs
Mounting Z-Rail
NATO
SWAT
RED
Picatinny
Wooden CameraAccessory Mounting 1 x 1/4"-20
2 x cold shoe
2 x single 15mm rod clampsDimensions 7.5 x 3.0 x 3.0" / 19.1 x 7.6 x 7.6 cm Weight 8.0 oz / 226.8 g Packaging InfoPackage Weight 0.75 lb Box Dimensions (LxWxH) 6.1 x 5 x 2.5"
- Zacuto VCT Pro Baseplate
- 2 x 6.5" 15mm Rods
- 1/4"-20 Camera Screw
- 3/8"-16 Camera Screw
- Limited Lifetime Warranty
- Zacuto Rosette Trigger Grip
- Limited Lifetime Warranty
- Zacuto Canon C500 Mark II Top Plate
- Limited Lifetime Warranty
- Zacuto Recoil Handle
- Limited Lifetime Warranty
- Barcode: 48385
- Supplier Code: Z-C500-P2