Description
The Rode NT1 5th Gen Digital Condenser Microphone fuses the classic sound signature of the legendary RØDE NT1 with cutting-edge, next-generation technology. It features RØDE’s groundbreaking Dual Connect output, offering both XLR and USB connectivity for connecting to an audio interface, mixer or console, and other audio equipment, or directly to a computer for plug-and-play recording. It features a professional-grade audio interface built in, with RØDE’s ultra-low-noise, high-gain Revolution Preamp™, high-resolution (up to 192kHz) A/D conversion, and advanced digital signal processing for recording pristine, studio-quality audio. It also features a 32-bit float digital output for recording everything from a whisper to the loudest drummer with no chance of clipping* and no need to set complex gain controls. These revolutionary features complement the warm silky character, extended frequency response, extremely low self-noise, and high SPL handling that the NT1 is renowned for, making the NT1 5th Generation the ultimate studio microphone for a wide variety of recording applications.
RODE NT1GEN5B Specs
Microphone
| Primary Applications | Live Sound, Studio Recording |
| Form Factor | Large Diaphragm Mic / Stand/Boom Mount |
| Intended Sound Sources | Vocals, Speech/Voice Over, Instrument |
| Sound Field | Mono |
| Operating Principle | Pressure Gradient |
| Capsule | 1 x Condenser |
| Diaphragm | 1" / 25.40 mm |
| Polar Pattern | Cardioid |
| Orientation | Side Address |
| Circuitry | Solid-State (JFET) |
| Pad | None |
| High-Pass Filter | None |
| Tone Adjustment | None |
| Gain Adjustment | None |
| Indicators | None |
| On-Board Controls | None |
| Windscreen | None |
Performance
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 132 dB SPL |
| Impedance | 100 Ohms |
| Sensitivity | -29 dBV/Pa at 1 kHz |
| Output Level | 8 mV (Max, 1 kHz) |
| Dynamic Range | 128 dB |
| Signal-to-Noise Ratio | 90 dB A-Weighted |
| Equivalent Noise Level | 4.5 dB A-Weighted |
Connectivity
| Output Connectors (Analog) | 1 x XLR 3-Pin Male (on Mic) |
| Output Connectors (Digital) | 1 x USB-C Female (on Mic) |
| Headphone Connector | None |
| Cable Length | 19.7' / 6 m |
| Wireless Connectivity | None |
| Bluetooth | None |
| Wi-Fi | None |
Digital Audio
| A/D Conversion | 32-Bit |
| Sample Rate | Up to 192 kHz |
| Digital Signal Processing | Compressor, EQ, Noise Reduction, Sound Presets |
| OS Compatibility | Windows macOS *As of January, 2023: Check with manufacturer for the most up-to-date compatibility |
| Mobile App Compatible | No *As of January, 2023: Check with manufacturer for the most up-to-date compatibility |
Power
| Bus Power | None |
| Operating Voltage | 24 V (Phantom Power) 48 V (Phantom Power) |
Physical
| Color | Black |
| Mounting | Shockmount (Included) |
| Included Case | None |
| Included Filters | Pop Filter |
| Construction Material | Aluminum |
| Dimensions | ø: 2 x L: 7.5" / ø: 5 x L: 19 cm (Microphone) |
| Weight | 11 oz / 311 g (Microphone) |
In the Box
- RODE NT1 5th Generation Large-Diaphragm Cardioid Condenser XLR/USB Microphone (Black)
- RODE SM6 Shock Mount with Detachable Pop Filter
- USB-C to USB-C Cable (9.8')
- XLR Microphone Cable (19.7')
- Barcode: 67135
- UPC Barcode: 698813009770
- Supplier Code: RODNT1ADIGITALB