Anton/Bauer Go 90 2-Battery and Charger Travel Kit (V-Mount)

Overview

Get your rig ready for a travel shoot with this Go 90 2-Battery and Charger Travel Kit from Anton Bauer. The kit includes two Go 90 V-mount batteries and a VM2 dual-bay V-mount travel charger.

The Go 90 lithium-ion batteries each feature a 98Wh capacity, support up to 8A continuous draw, and they have a slim design to fit on a small rig or gimbal. They each feature P-Tap and USB Type-A outputs to power cameras or accessories, and the 5-LED status gauge shows accurate battery capacity. The compact VM2 charger allows you to charge both batteries simultaneously, and it also features a 4-pin XLR output that provides up to 16.7 VDC output to power your camera while charging your batteries. It also features a built-in fan to keep the charger cool in warm environments.

Core Features

Anton/Bauer Go 90 Battery (V-Mount)

The slim but powerful V-mount Anton/Bauer Go 90 Battery can be used to power your V-mount camera or other pro video gear. Though slim, and suitable for use when shooting handheld or on a gimbal, the battery has a 98Wh capacity and supports power draws up to a total of 8A.

It features a simple, intelligent, and easy-to-understand 5-LED battery gauge, with each LED block representing 10% battery capacity remaining. The LED gauge is activated with a tap of a button, and it turns off by itself to save power. The battery incorporates standard power output accessories including a P-tap, which is weather resistant, and a USB power output port. In addition to being weather resistant, the P-Tap can also be used to charge the battery with a compatible P-Tap charger.

• Slim and lightweight battery with a capacity of 98Wh
• Supports continuous power draws up to 8A total
• Working temperature range of -10 to 50°C
• Weather resistant P-Tap port
• Chargeable with V-mount or P-Tap charger
• 5-LED indicator power gauge

Charger Features

Anton/Bauer VM2 Dual-Bay Charger with 4-Pin XLR Output (V-Mount)

This slim V-mount Anton Bauer VM2 Dual-Bay Charger with 4-Pin XLR Output allows you to simultaneously charge two V-mount batteries (or a single battery) from 100 to 240 VAC sources, and it supports worldwide power of 50/60 Hz. The charger can also output 16.7 VDC through the 4-pin XLR while charging batteries, allowing you to power your camera and charge your batteries simultaneously.

It features a top handle for easy transport and a built-in power management system that protects your batteries and powered devices from damage. The built-in intelligent safety technology continually monitors all attached devices, batteries, and devices connected to the XLR port, and it will shut down if a fault or overvoltage condition is detected, protecting your gear. A built-in fan helps to keep the unit cool and functioning. In addition, when AC power isn't available, you can connect one or two batteries to the charger, and it will output 15 VDC via the 4-pin XLR port.

• LED charge status indicators
• Supports worldwide power
• IEC AC power input
• Dedicated on/off switch

Compatibility

• Titon 90
• Titon 150
• Titon 240
• Titon SL 90
• Titon SL 150
• Anton Bauer GO 90