PRODUCT HIGHLIGHTS
- Rigid, Rolling Case
- Dust and Waterproof, Low-Profile Wheels
- Impact and Corrosion Resistant
- Single-Stage Extendable Handle
- Ergonomic, Fold-Away Carry Handles
- Double-Hinge Latches, Padlock Compatible
- Reinforced Corners, Auto Pressure Valve
- Second Skin and Dividers Kit
- Custom Interior Insert, Soft Dividers
- Organizes and Protects Case Contents
The black HPRC 2700W Rolling Resin Case provides up to 21.8 x 18.1 x 10.1" of capacity and is designed to protect its contents from impacts, moisture, dirt, or corrosion. Built-in, low-profile wheels, along with a single-stage extendable handle, allow for easy movement of heavy loads. For instances where it must be lifted off the ground, two ergonomic carry handles are provided, a large side handle, and a top handle for use when this rolling case is placed upright on its wheels. Utilizing a polypropylene, fiberglass, rubber, and stainless-steel construction, the HPRC 2700W Rolling Resin Case is ATA 300, IP67, STANAG 4280, and DS 81-41 complaint. When closed, this rolling case's interior is fully sealed from dust, as well as water from 5.9" to 3.3' deep, while providing long-lasting resistance to wear-and-tear.
While the extendable handle is retracted, the carry handles can also be folded downward, helping to reduce the amount of space occupied by the HPRC 2700W Rolling Resin Case whether it is placed upright, or on its base. Four, moulded feet elevate the base, protecting it from wet and abrasive surfaces. While its lid faces upward, the rolling case's interior can be reached by opening the four latches along the lid. The base and lid are joined by a pair of heavy-duty hinges, while the latches' double-hinged design prevents the HPRC 2700W Rolling Resin Case from accidentally opening due to bumps or shocks when in transit.
Both the base and lid also include a pair of shackle eyelets that align when closing the HPRC 2700W Rolling Resin Case. Two separately available padlocks with 1/4" diameter shackles can then be installed along the side handle for enhanced security. While closed, a built-in valve automatically equalizes air pressure between the interior and exterior of the rolling case. This pressure valve is water-resistant and further prevents the HPRC 2700W Rolling Resin Case from accidentally opening during air travel or when moving from areas of low altitude to high altitude.
An HPRC Second Skin and Dividers Kit for the HPRC 2700W Resin Case is also provided. Once installed, this divider kit helps maximize available carrying space and further protects equipment or valuables for transport. The HPRC Second Skin and Dividers Kit include a one-piece, drop-in insert along with 10, touch-tab dividers. The insert's moulded, nylon construction creates a custom fit that cushions the sides and bottom of an HPRC 2700W Resin Case, while the non-abrasive dividers provide interior organization that can easily be rearranged.
Carry/Transport Options | Side Handle, Telescoping Handle, Top Handle, Wheels |
Closure Type | Latch, Hasp |
Materials | Polypropylene |
Interior Contents | Dividers/Organizers |
Exterior Dimensions | 24.4 x 20.4 x 10.8" / 62.0 x 51.8 x 27.4 cm |
Interior Dimensions | 21.8 x 18.1 x 10.1" / 55.4 x 46 x 25.7 cm |
Base Depth | 8.27" / 21 cm |
Lid Depth | 1.81" / 4.6 cm |
Watertight | Yes, O-Ring Seal |
IP Rating | IP67 |
Storage Temperature | -40 to 176°F / -40 to 80°C |
HPRC 2700W Rolling Resin Case with Second Skin and Dividers Kit (Black)
HPRC Second Skin and Dividers Kit for HPRC2700W Series Wheeled Hard Case
Limited Lifetime Warranty
- Barcode: 32715
- UPC Barcode: 8033389477950
- Supplier Code: HPRC2700WSSKBLB