Sunwayfoto Carbon Fiber Tripod Extension Arm CCB-01

32mm Carbon Fiber Tripod Extension Arm Overview

360° Panning Base

The 360 degree panning base provides smooth rotation, positioning is accurate with the engraved scale and the ratcheted Lock-knob can be tightened at any angle.

180° Fore-aft Tilting

The extension Arm fore-aft tilting travel is 180 degrees, while it can be set horizontally for Nadir shots.

Gear Tooth Structure with 15Kg Load Capacity

 Thanks to the gear teeth, the tilting mechanism is stably locked almost at any angle in 7.5° increments without drifting.

32mm Grooved Carbon Fiber Tube

The grooved carbon fiber extension arm tube, combined with a boss in the tube holder, effectively prevents any shifting.

Lever-release Lock

A Lever-release lock swiftly locks the extension arm tube, saving time during adjustments.

Counter-weight Hook

Counter-weight hook at the end of the extension tube to hang a bag or any heavy item to balance weight on each side hence ensures a stable shooting setup.

Rotatable End Hook

The hook is 360 degrees rotatable and can hang items at any angle.

Easy to attach and detach

The top platform is installed via a dual-thread 3/8" and V4" bushing, compatible with ball heads, camera sockets, moobile phone brackets etc.

Anti-Twist Safety Set Screws

There are 2 set screws on the top platform. The inner one tightened from above binds the top platform to the extension arm tube and the outer one tightened from below immobilizes the ball head (not included in the set) on the platform avoiding any shifting.

3/8” Mounting Socke

Base mounting socket is 3/8-16, base diameter 54mm, can be mounted on most tripods available.