The Genie Motion Control Time Lapse Device from Syrp is a 10cm (4") cube designed in New Zealand. It weighs 1.5kg's (3.3 lbs) and attaches to standard gear such as dollies, sliders, jib arms and tripods. Simply attach the panning accessory to your tripod or support and mount your optional camera and ball head to the 3/8"-16 stud atop the Genie.
The weight of your equipment is rarely a concern since it supports up to 20kg's (44 lbs) . An illuminated bubble level is built in to help in setting up for panoramas. At maximum panning speed a 360° pan takes 5 seconds, while 39" of linear movement takes 23 seconds. Linear time lapse can be done on a rail or on a linear support system of your own making. While the Genie comes with 9.85' of rope to pull it across the rail, the movement of your time lapse is only limited by the length of your rope. Kevlar-cored rope with lengths of 328', 164' or 32.8' are available for separate purchase.
The Genie has been tested successfully on a homemade 18 m (60') dual cable stretched over a lake. Inputs include both USB for firmware and a sensor input. The free firmware upgrade enables bulb ramp-in and ramp-out functions and HDR (High Dynamic Range). Ramping is the process of modifying exposure settings on a camera in order to maintain a desired exposure value while the camera is in Bulb mode. This is especially valuable for transitional day into night, or night into day time lapses. The sensor input accepts a motion, light, sound or other type of sensor to start your program in response to specific stimuli. The Genie ships with both panning and sliding bases, two slider mounts, 9.85' of rope and a multi-voltage charger for its built-in battery. A three-hour charge gives you about 12 hours of run time, depend on the weight of your camera. The Genie is compatible with approximately 130 cameras from nine major brands.
Maximum Speed Video mode: Linear: 39" (100 cm) in 23 seconds Panning: 360° in 5.0 seconds Power Supply Input: 110-240VAC, 50/60Hz Output: 15VDC, 1.5A For use in: Europe, USA, Canada, Mexico, India, Nigeria, Ghana, Australia, New Zealand, Papua New Guinea, Hong Kong, Singapore, Japan, UAE, South Korea Battery Lithium-ion 11.1V Battery Run Time Up to 12 hrs. depending on camera weight Charging Time 3.0 Hrs. Connectivity USB x1, Sensor input x1 Head to Tripod Mounting Thread Bottom: 3/8"-16 and 1/4"-20 Top: 3/8"-16 Dimensions 4.0 x 4.0 x 4.0" (102 x 102 x 102 mm) Weight 3.3 lb (1.5 kg)