The Sony DWA-01D Digital Wireless Adapter is used to mount the DWR-S01D slot-in receiver to existing cameras. A break-out cable is provided for either AES digital or balanced analog output. The adapter also provides a connector for camera power and is supplied with a 4-pin DC cable.
Mounting the DWA-01D onto camcorders using a V-mount battery system requires the A-8278-057-B mounting bracket. An ABWMK-SI bracket is necessary when mounting onto cameras with Anton-Bauer battery systems. The brackets may be purchased directly from Sony parts.
Specifications
Audio Section
Analog OutputSMC9-4S (female) (x2)
Output Impedance : 150 O or less
Digital OutputSMC9-4S (female)
Reference output level : -36 dBFS/-20 dBFS (switchable)
Output Impedance : 110 O or less
Other Equipment
Headphone OutputOutput level : 50mW (16 O load, at T.H.D = 1 %)
o3.5 mm(5/32 inch) stereo mini jack
Word SyncInput Impedence : 75 O
Input connector : BNC-R
External Word Sync : 32 kHz to 96 kHz
General
Power Requirements4-pin DC input
10 V DC to 17 V DC (12 V DC nominal)
Operating Temperature32°F to 122°F
0°C to 50°C
Storage/Transport Temperature-4°F to +140°F
'-20°C to +60°C
Dimensions *[1]88 x 144 x 31.5 mm
3 1/2 x 5 3/4 x 1 1/4 inches
(W x H x D)
MassApprox. 330 g (excluding receiver)
Approx. 11.6 oz (excluding receiver)
Sony DWA-01D Adapter for DWR-S01D Digital Wireless Receiver
Balanced XLR and AES Breakout Cable
4-pin DC Power Cable
- Barcode: 45257
- Supplier Code: DWA01D