Godox AD100Pro II Pocket Flash

Overview

The Godox AD100Pro II Pocket Flash represents a major leap in performance as a compact, portable, and enhanced 100Ws flash unit. It features refined internal components, distinct group indicators, and careful assembly, highlighted by an improved color screen, a more powerful LED modeling light, and a built-in zoom. Building on the popularity of its predecessor, the AD100Pro II delivers upgraded performance with a dual 2.4 GHz and 433 MHz wireless system, combining TTL/M/Multi functionalities and dependable reliability for both commercial photographers and photo enthusiasts.

With a 1/256 to 1/1 power range adjustable in 0.1 step increments, a removable battery, an increased number of full-power flashes, and a compact anti-slip body weighing approximately 0.54 kg, the AD100Pro II is well suited for studio and on-location use, whether operating in single or multi-flash environments.

Core Features

• 100Ws pocket-sized flash with upgraded performance
• Dual 2.4 GHz and 433 MHz wireless system
• TTL, Manual, and Multi flash support
• 1/256 to 1/1 power range with 0.1 step control
• Up to 490 full-power flashes per charge
• Built-in zoom and improved LED modeling light

Wireless TTL Compatibility

Designed to meet the needs of photographers at various experience levels, the AD100Pro II incorporates Godox’s dual 2.4 GHz and 433 MHz wireless system. It supports TTL/M/Multi flash systems for major camera brands. The 2.4 GHz wireless X system is fully compatible with TTL auto flash systems from Canon, Nikon, Sony, FUJIFILM, OM SYSTEM, Panasonic, Pentax, and Leica.

Power output can be adjusted from 1/256 to 1/1 in precise 0.1 step increments, and the flash supports up to 1/8000 sec High-Speed Sync to accommodate a wide range of creative lighting scenarios.

Light Quality & Performance

Utilizing refined optics, the AD100Pro II delivers natural, soft, and uniform illumination with smooth and flattering light falloff. A built-in adjustable zoom ranging from 28–85mm allows photographers to fine-tune beam spread across different focal lengths, offering greater control over lighting coverage.

With 100Ws of output and an upgraded cooling system, the AD100Pro II is capable of stable and sustained performance during demanding shoots. According to the manufacturer, the unit can achieve approximately 60 to 100 consecutive full-power flashes.

2.4 GHz Wireless X System

The AD100Pro II integrates seamlessly into Godox’s 2.4 GHz wireless X system, enabling quick pairing and control with a wide range of compatible devices. It automatically functions as a receiver based on the selected transmitter and can be controlled by optional XPro II, X2T, and X3 series triggers, as well as V1Pro, V100, and V860III flashes.

The wireless system offers a transmission range of up to 100 m, with support for 16 receiver groups, 32 channels, and 99 IDs. Quick-sync pairing is supported when used with optional X3 and X3Pro triggers for rapid wireless setup.

433 MHz Wireless Module

In addition to its built-in 2.4 GHz receiver, the AD100Pro II can operate using 433 MHz signals when paired with the optional Godox FR433 receiver via the USB-C port. This setup enhances signal stability and minimizes interference, allowing for precise flash control.

When used with the separately available FT433 flash trigger, longer transmission distances can be achieved. The FT433 is compatible with Canon, Nikon, and Sony cameras and can also control optional Godox flashes such as the AD200Pro II, AD400Pro II, AD600Pro II, and AD600BM II.

Improved Battery Power

The AD100Pro II is powered by an included high-capacity 7.2V, 3300mAh lithium battery. The battery can be charged directly through the integrated USB-C charging port and provides up to 490 full-power flashes with recycling times ranging from 0.01 to 1.5 seconds.

A full recharge takes approximately 2 hours and 45 minutes using the included charger and USB-C charging cable.

Onboard Control & Group Color Functionality

An upgraded color HD screen and optimized control buttons allow for intuitive onboard operation. For multi-flash setups, the AD100Pro II supports 16 groups, each identified by a unique color indicator displayed directly on the flash head, enabling quick and easy group recognition even from a distance.

Improved Features & Optional Accessories

The AD100Pro II incorporates multiple refinements within its palm-sized design, including an upgraded fan system and a multi-angle mounting bracket for flexible positioning. A brighter 5W LED modeling light offers adjustable output across 10 brightness levels.

The flash features a built-in magnetic mount compatible with Godox round-head accessories, including the AK-R1 accessory kit, AK-R22 collapsible diffusion dome, AK-R21 projection attachment, Bowens S3 bracket, and various light stands. Additional optional modifiers such as softboxes, umbrella diffusers, snoots, UL series softboxes, and BDR reflectors expand creative lighting possibilities for portraits, still life, advertising, and more.

Additional Details:

• Compact and highly portable design measuring approximately 12.2 x 7.4 x 7.4 cm
• TTL mode available only when wireless function is enabled
• S1 and S2 optical slave modes
• First curtain and second curtain sync modes
• Stroboscopic flash mode
• Beep, standby, and delay settings
• Power switch and automatic power-off functions
• Battery indicator illuminates during charging
• On-screen battery level indicator
• Battery detaching pusher for convenient removal
• Battery protection against overcharge, overdischarge, overcurrent, and short circuit
• 3.5 mm sync port for wired flash triggering
• USB-C port for firmware upgrades and optional 433 MHz receiver connection
• Dual 1/4"-20 mounting points; includes AD-E2 holder