The Rode Stereo VideoMic Pro builds on the success of the Rode VideoMic Pro & Stereo VideoMic with improved stereo reproduction, sound quality and ergonomic design. The Stereo VideoMic's capsule feature a matched pair of 1/2" cardioid condenser capsules, mounted in a coincident X/Y position for accurate stereo imagery and detail. The microphone's small, ergonomic footprint features an integrated shock mounting system for superior isolation from vibration and mechanical noise. The multi-strand output cable is terminated with a 1/8" (3.5mm) output connector and delivers significantly lower noise transference than traditional audio cable.
The included shoe mount features an integrated shockmount system for even further protection against handling noise. The Stereo VideoMic features a high pass filter switch at 75Hz for minimizing low frequency noise, and a -10dB Pad for maximizing headroom for capturing loud signals without distortion. The +20dB level boost switch is specifically designed to provide a higher quality signal with DSLR cameras. When activated, camera preamp level is reduced, resulting in a lower noise floor and much clearer recording.
- Broadcast recording quality on-camera microphone
- Matched pair 1/2" condenser capsules in XY stereo configuration
- Ultra lightweight, compact form factor
- Two step High Pass Filter (flat, 75Hz)
- Three position level control (-10dB, 0, +20dB)
- 9V battery powered - over 100 hours use (alkaline)
- Integrated shock mounting
- Integrated foam windscreen
- 3.5mm stereo mini-jack output
- Billeted metal camera shoe mount with 3/8" thread for easy boompole mounting
| Transducer | Pressure Gradient, JFET impedance converter |
| Polar Pattern | XY Cardioid (Coincident) |
| Frequency Range | 40 ~ 20,000 Hz (selectable HPF @ 75 Hz) |
| Output Impedance | 200 Ohms |
| Maximum Output | +4.2 dBu (@ 1% THD into 1 kOhms) |
| Power Supply | 9 V alkaline battery |
| Connection | 1/8" (3.5mm) stereo mini-jack |
| SPL | 134 dB, max (1 kHz, 1% THD into 1 kOhms) |
| Sensitivity | -38 dB re 1V/P (12.6 mV @ 94 dB SPL) ±2 dB @ 1 kHz |
| EIN | 20 dBA SPL (A - weighted per IEC651) |
| Dynamic Range | 100 dB (per IEC651) |
| Signal to Noise Ratio | 73 dB SPL (A - weighted per IEC651) |
| Dimensions | 2.6 x 4.25 x 5.1" (66 x 108 x 130 mm) |
| Weight | 4.1 oz (117 g) (without battery) |
| Packaging Info | |
|---|---|
| Package Weight | 0.55 lb |
| Box Dimensions (LxWxH) | 7.3 x 6.4 x 3.0" |
- Rode Stereo VideoMic Pro
- Metal Camera Shoe Mount with 3/8" Thread
- Windscreen
- Barcode: 20131
- UPC Barcode: CR0388420
- Supplier Code: RODSVMPRYCOTE