Overview
The Sennheiser MM 445 Dynamic Microphone Module For Wireless Systems pushes the potential of dynamic microphones to the limits of what is technically viable. The direct, focused sound gives every voice greater presence and intensity. The sophisticated transparency and the richness of the low and middle ranges create unparalleled acoustic capabilities.
Core Features
Time and effort have gone into tailoring the acoustics of the MM 445 for modern stages and the most demanding of live productions. Its highly-developed aluminium-copper voice coil forms the foundation for a noticeably direct and nuanced sound.
Key Features:
- Microphone module
- Lightweight, rapid-response aluminium-copper voice coil
- High-resolution, direct sound for noticeably high proximity to vocals
- Directionality: high-rejection supercardioid
- Extremely high feedback resistance
- Large diaphragm diameter
- Spring-mounted capsule to shield it from body-borne noise
- Hum compensation coil to eliminate electromagnetic interference
- Basket
- Sennheiser standard capsule interface
Control & Connectivity
The pick-up pattern of this high-rejection supercardioid microphone systematically blocks out ambient noise and guarantees maximum protection from feedback in every stage situation and set-up.
The MM 445 is compatible with all Sennheiser wireless systems based on the standard capsule interface.
Specifications
| Transducer principle | dynamic |
| Frequency response | 40 – 20,000 Hz |
| Pick-up Pattern | high rejection supercardioid |
| Sensitivity (free field @ 1 kHz) | 1.6 mV/Pa, -55.9 dBV/Pa |
| Max. SPL @ 1 kHz | 163 dB SPL |
| Equivalent noise Level | 18 dB(A) |
| Dynamic range | 145 dB(A) |
| Nominal impedance (@ 1 kHz) | 245 O |
| Min. terminating impedance | 1 kO |
| Connector | XLR-3M |
What's Included
- 1 Sennheiser MM 445 Dynamic Microphone Module For Wireless Systems
- 5 Pop shields
- 1 Pouch
- Barcode: 83362
- UPC Barcode: 615104340596
- Supplier Code: 508830