Name: GVM Professional Video Aluminum Alloy Motorized Camera Slider (32")
Brand: GVM
SKU: GT-J80D
Price: 639 NZD

GVM Professional Video Aluminum Alloy Motorized Camera Slider (32")

SKU:

GT-J80D

Key Features

30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
6 x Camera Control Cables Included

Description
SPECS
IN THE BOX
INFO

GVM Motorized Camera Slider Overview

The 32" GVM Professional Video Aluminum Alloy Motorized Camera Slider features an 11-pound horizontal load capacity as well as a 30" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The aluminum rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.

Programmable Modes

Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.

Orientation

Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.

Camera Compatibility

The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

GVM Motorized Camera Slider Specs

Performance

Load Capacity	11 lb / 5.0 kg
Travel Distance	30" / 76.2 cm
Bubble Level	Yes

Mounting

Tripod Mounting

3 x 1/4"-20 Female Thread
3 x 3/8"-16 Female Thread

Rail

Material

Aluminum

Carriage

Camera Mounting Screw	1/4"-20 Male, 3/8"-16 Male
Dimensions	4 x 4" / 10.2 x 10.2 cm

Bearings

Number of Bearings

Motor

Power	4 W (7.2 V / 400 mA)
Motor Sliding Speed	0.35 to 1.67 in/s / 0.89 to 4.06 cm/s

Physical

Body Material	Aluminum
Track Length	32" / 81.28 cm, Including Legs
Track Height	4" / 10.16 cm
Leg Height Adjustment	4.00 to 4.79" / 10.16 to 12.16 cm
Weight	6 lb / 2.72 kg

Packaging Info

Package Weight	10.3 lb
Box Dimensions (LxWxH)	36 x 11.5 x 4.5"

GVM Professional Video Aluminum Alloy Motorized Camera Slider (32")
Controller
L-Series Battery
Battery Charger
Controller Connection Line
Camera Control Extension Cable
6 x Camera Control Cable
Carrying Bag
Limited 1-Year Warranty

Barcode: 60306
UPC Barcode: 682141383848
Supplier Code: GT-J80D