Overview
The SWIT KA-M20S Dual Pocket V-Mount Batteries Hot Swap Plate is an extender plate designed for SWIT's PB-M series Pocket V-mount batteries. Fitted with two PB-M batteries, the plate matches the footprint of a standard large capacity V-mount battery while giving you the flexibility to draw power from each battery individually or together, all in a slim, balanced housing built for on-camera use.
Automatic Hot Swap and High Load Modes
When device power draw is below the maximum load of a single PB-M battery, the KA-M20S runs in Hot Swap mode, powering from one battery at a time so the free battery can be swapped out without interrupting power. When draw exceeds a single battery's limit, it automatically switches to High Load mode, drawing from both batteries together for higher power devices.
Power and Hot Swap Indicators
Independent power LEDs for each battery flash to show discharging status, while a dedicated empty indicator lets you know when a battery needs changing, so you always know the state of both batteries at a glance.
Dual D-Tap Power Outputs
Two D-tap sockets, positioned on the top and side of the plate, give you flexible power connections to a range of cameras and accessories.
General
| Battery Compatibility | 2x SWIT PB-M Series Pocket V-Mount Batteries |
| Output | V-Mount: 11 to 16.8V D-Tap: 2x, 11 to 16.8V |
| Max Load | Hot Swap Mode: Max Load of Single Smaller Battery (D-Tap Limited to 150W/10A) High Load Mode: Max Load of Single Smaller Battery x2 (D-Tap Limited to 150W/10A) |
Physical
| Dimensions | 148 x 108 x 28 mm |
| Weight | 238 g |
Environmental
| Working Temperature | -20 to 50°C |
What's Included
- SWIT KA-M20S Dual Pocket V-Mount Batteries Hot Swap Plate
- Barcode: 35683
- UPC Barcode: 6948193507491
- Supplier Code: KA-M20S