Godox iT32 TTL Mini Flash with X5F TTL Wireless Flash Trigger for FUJIFILM

Overview

The Godox iT32 TTL Mini Flash with X5F TTL Wireless Flash Trigger for FUJIFILM bundles Godox's compact, versatile iT32 mini flash with the X5F trigger, giving you a complete on- and off-camera TTL flash system for FUJIFILM cameras straight out of the box. The iT32 offers TTL, Manual, and Multi flash modes alongside Godox's 2.4 GHz X wireless system, while the included X5F adds a hot shoe connection and wireless flash triggering for compatible FUJIFILM cameras.

Adjustable output from 1/128 to 1/1 power, a 1.5 second recycling time, HSS support, a colour touchscreen, and an LED modelling lamp give precise control over lighting. The built-in USB-C rechargeable battery delivers up to 510 full-power flashes, all in a lightweight 170 g body.

Godox X5F Wireless Trigger

The included X5F trigger attaches to the iT32 via a magnetic interface and rotating locking ring, then mounts to your FUJIFILM camera's hot shoe for on-camera use, or detaches to trigger the iT32 wirelessly from up to 20 m away. It runs on its own internal 3.8V, 100mAh rechargeable battery.

Effortless Wireless Sync

Removed from the iT32 and mounted to a camera's hot shoe, the X5F trigger wirelessly controls select settings up to 20 m away. Used together in iT32+X5 mode, the pair can sync trigger other Godox flashes up to 80 m away, acting as a master unit for flexible multi-flash setups.

Colour Touchscreen and LED Modelling Lamp

An intuitive colour touchscreen and simplified buttons make operation straightforward, while the LED modelling lamp supports brightness adjustments from level 1 to 10.

Compact Body with Included Accessories

The iT32 is a compact 10.2 x 5.6 x 3.8 cm flash with a transparent wide-angle diffuser, a white catchlight panel, a photocell sensor, and a sync cord port. Firmware updates and charging are handled via USB-C. In the box are a USB-C charging cable, a magnetic mini stand, a diffuser, two magnetic colour filters, and a storage bag.

Compatibility:

This kit pairs the iT32 with the X5F trigger, giving you hot shoe mounting and wireless flash triggering for compatible Fujifilm cameras, including X-Pro2, X-T20, X-T2, X-T1, GFX50s, GFX50R, X-T30, X-T4, X-T3, X-S20, X-T5, X-Pro1, X-T10, X-E1, X-A3, X100F, and X100T.

Additional Benefits

• The iT32 automatically identifies which X5 trigger version is attached.
• A battery level indicator on the iT32 shows the remaining charge at a glance.
• Supports S1/S2 optical slave modes.
• Stroboscopic flash mode fires up to 100 times, with an output range from 1/128 to 1/4.
• TCM conversion is available in Wi-Off mode.
• Standby and auto-off settings help conserve battery life.
• HSS support and second-curtain sync availability can vary by camera model.
• Built-in over-temperature protection.
• The X5 trigger has no power on/off switch; it uses colour indicators instead.
• The X5 trigger's own battery status can be viewed via the iT32 menu.
• The X5 trigger reaches a full charge in approximately 3 hours when attached to the iT32.
• The X5 trigger discharges from a full battery in approximately 16 hours.