Hollyland LARK M3 Camera-Mount Wireless Receiver with USB-C & 3.5mm Connectors (2.4 GHz)

Overview

The Hollyland LARK M3 Camera-Mount Receiver is the receiver for the LARK M3 wireless microphone system that sits on your camera. It takes up to four LARK M3 transmitters, which are sold separately, and has a 3.5mm output for cameras plus a USB-C port for digital audio to a computer or mobile device.

It can be used alongside the USB-C plug-in receiver, and a side button switches it to 4-track mode for recording each voice separately. The internal rechargeable battery runs for up to 8 hours and is recharged in a LARK M3 charging case, which is sold separately.

Two Audio Outputs

A combined hot shoe and cold shoe mount attaches the receiver to your camera quickly. The analogue 3.5mm output feeds audio straight into the camera for camera-based productions, while the USB-C port sends digital audio to a computer or mobile device for other recording setups, so one receiver covers both kinds of shoot.

4-Track Mode

When the receiver is connected to a camera through the hot shoe, or to a computer with the USB-C to USB-C cable, a side button switches it to 4-track mode. Four-track recording needs an app that supports it. Without the hot shoe or USB-C cable connection it supports mono and stereo only, and a device that cannot handle 4-track will drop to stereo.

LARK M3 System Features

• Up to four transmitters and four receivers, which you can add or remove mid-shoot without breaking the recording
• The first receiver connected acts as the Primary Receiver, with system control and real-time transmitter status; Secondary Receivers can monitor transmitter status without access to the adjustments
• Up to 305 m range in open space, with an RF interference-resistant circuit
• 48 kHz / 32-bit float recording on iOS and 24-bit on Android over digital USB-C
• Three-level AI noise cancellation, eight vocal presets, one-tap vocal enhancement with de-essing and Auto-Limit Clip Protection