Overview
The silver Master C-Stand with 51cm Riser and Sliding Leg Kit from Kupo is essential on set for everything from holding flags and reflectors to mounting lights. The kit contains a Master C-Stand with a single leg that's height adjustable for uneven terrain. A 2-1/2" removable grip head with a large T-handle is included, as is a 51cm grip arm with a permanently attached 2-1/2" grip head. The arm has a hex attachment at its end to prevent light fixtures from twisting when mounted.
A staple of the film and video industry, the silver 2m Master 51cm Riser C-Stand with Sliding Leg from Kupo is designed to support light fixtures and other grip gear on set or on location.
While two of the legs are spring-loaded, the distinguishing feature of this stand is the height-adjustable third leg. By loosening a locking knob and sliding it up and down the main riser section, this sliding leg enables the user to raise one leg higher than the others to accommodate rough or uneven terrain, or to position it in tight spaces.
This 51cm double riser stand has two telescoping risers and one main section, for a total of 152cm. The 46cm base brings its total height to 2m (6.5'). The legs nest together for efficacious storage and transport.
Five times stronger than aluminium, the Master C-Stand's base is made of zinc alloy to sustain the weight of heavy sandbags or other equipment. The aluminium cast locking collars are outfitted with stainless steel Heli-Coil that protects the risers from damage.
The 2-1/2" Grip Head With Big Handle from Kupo has four V-shaped jaws, an ergonomic oversized T-shaped handle with dedicated roller bearings for maximum torque, and a non-slip aluminium friction disc. This durable grip head is made of aluminium and steel and has a chrome-plated finish.
Often paired with a C-Stand, the silver 51cm Hex Grip Arm from Kupo has a 5/8" hex pin at one end of a 51cm textured, non-slip steel tube and a 2-1/2" grip head at the other. The hex pin has 6 milled flat surfaces so that you can attach a light to it without it turning and use the arm like a mini boom. The grip head has a pair of rotating discs attached to a 5/8" receiver. The discs have 4 V-shaped jaws to accept 5/8", 1/2", 3/8" or 1/4" accessories like flags, scrims or even another grip arm. The jaws are locked down by an oversized, ergonomic T-handle.
Features
- Four V-shaped jaws
- Oversized T-shaped handle with dedicated roller bearings
- Non-slip aluminium friction disc
Specifications
| Master 51cm; Riser C-Stand with Sliding Leg (Silver, 6.5') | |
| Minimum Extension | 36.02" (91.5 cm) |
| Maximum Extension | 77.95 in (198.0 cm) |
| Maximum Load Capacity | 22 lbs (10 kg) |
| Weight | 11.7 lb (5.3 kg) |
| 2-1/2" Grip Head With Big Handle (Chrome-Plated Finish) | |
| Construction | Aluminium and steel |
| Dimensions (LxWxH) | 7.38 x 3.92 x 2.79" (18.73 x 9.96 x 7.08 cm) |
| Weight | 1.72 lb (0.78 kg) |
| 51cm Hex Grip Arm (Silver) | |
| Material of Construction | Steel and aluminium |
| Attachments | 5/8" (16 mm) Receiver 5/8", 1/2", 3/8", 1/4" (16 mm, 12.7 mm, 9.5 mm, 6.35 mm) jaws |
- Barcode: 38354
- UPC Barcode: 6954016562042
- Supplier Code: CS-20MK