Sunwayfoto Ultra Compact Series Carbon Fiber Tripod with Special Shaped Center Column T2541CE

Overview

T2541CE ULTRACOMPACT SERIES

T2541CE belongs to UltraCompact Series which has powerful performance and most compact structure. Featuring most compact and powerful structure.

With their triangular shaped center column, the legs fold together closer minimizing the overall volume when packed. Easy to carry on the road,while maintaining the functionality of a traditional center column.

✪ T6061 Aluminum and carbon fiber main body material, elaborately CNC machined, providing great stablity of the tripod.

28% Less Volume

The triangular shaped center column ensures that the legs can fold tightly together with minimal space in-between. Compared with similar tripods the T2541CE occupies 28% less volume when packed.

TRIANGULAR CENTER COLUMN, TIGHT FOLDING

With this special-shaped center column the legs of the tripod fold together closely reducing the total diameter by 13% when packed.

Tripod with Triangular Center Column Legs fold tightly around the column, lesser space.

Tripod with traditional center column Larger packed diameter.

QUICK LEVER-LOCK ||

Swiftly locks the center column at desired height

High grade Aluminum combined with curved lines of the center column facets ensure maximum contact area with the apex, reaching highest locking strength and max load capacity.

SEALED TWIST LOCK WEATHERPROOFING SYSTEM

Sealed Twist Locks effectively prevent water, sand or dust from entering the locks and tubes, in this way extending the longevity of the tripod.

EXCELLENT STABILITY

The Lightweight but strong carbon fiber leg tubes, combined with 40 mm lengthened friction tube shims between leg sections, maximize isolation and rigidity of the joints of fully extended legs. Threaded connector between the carbon fiber tube and metal part with thread lock, effectively prevent loosening up after long time use.

SMOOTH EXTENSION AND RETRACTION OF THE LEGS, SWIFT LOCKING AND UNLOCKING

Quick action twist locks, wrapped with silicone for better grip, require only 4 of a turn to loosen or tighten.
Super-fit silicone lock grips do not slip even after long term submerging under water.

Vent holes at the upper part of the leg tubes ensure efficient air inflow and exhaust when pulling or pushing back the leg tubes in order to extend and fold the tripod swiftly and smoothly.

STABLE JOINT STRUCTURE

The innovative design of an anti-twisting inclined surface between the inner connecting part of the legs and screws, effectively prevents loosening up of the tripod legs from the apex due to frequent use. No need to tighten it repeatedly.

RUBBER CUSHION PADS

Increase friction between ballhead and tripod, and at the same time protect the base of the mounted equipment from scratches.

CENTER COLUMN SWITCHING

Included short and long center columns can be switched easily to meet different demands of photographers for standard or ground level shooting.

FURTHER STABILIZATION

New Design counter weight hook at the end of the center column allows to hang your bag or backpack to further stabilize the tripod in windy conditions.

TRIPOD HEIGHT

From Flat to Fully Extended.

RESERVED MOUNTING HOLES

Extra 1/4" mounting holes provide connection to other equipment enriching the tripod functionality.

BOTH RUBBER FEET AND STAINLESS STEEL SPIKES INCLUDED

Choose either set according to the shooting environment.

RUBBER FOOT : For indoor shooting or on smooth surfaces ensures stability and protects from scratches.

STAINLESS STEEL : SPIKE For outdoor shooting on soft ground or sand, provides better grip.

✪ 4 Leg Sections with tube diameters of 0.63inch(16mm),0.75inch(19mm),0.87inch(22mm) and 0.98inch(25mm)，reaching as low as 0.98inch(4cm) and max height of 0.98inch(143cm). 3 Leg Angles of 23, 55 and 85 for daily shooting. The lightweight but strong carbon fiber leg tubes, combined with 40mm lengthened friction tube shims between leg sections, maximize isolation and rigidity of the joints of fully extended legs. Load Capacity of 26.5lb(12KG）.

✪Sealed Twist Locks effectively prevent water, sand or dust from entering the locks and tubes, in this way extending the longevity of the tripod.Stable joints design effectively prevents loosening up of the tripod legs from the apex due to frequent use.

✪ Included short and long center columns can be switched easily to meet different demands of photographers for standard or ground level shooting.

✪ Vent holes at the upper part of the leg tubes ensure efficient air inflow and exhaust when pulling or pushing back the leg tubes in order to extend and fold the tripod swiftly and smoothly. Quick action twist locks, wrapped with silicone for better grip, require only 1/4 of a turn to loosen or tighten.