Tilta HDA-T02 Overview
Fast to set up with eight mounting modes to attach it to your car, the Hydra Alien Car Mounting System Pro Kit from Tilta is a flexible shock-absorbing system for your camera on the DJI RS2/RS 3/RS 3 Pro system. Featuring a V-mount battery plate for power, you can mount the Hydra Alien at virtually any angle as its suction cup supports up to 110 lb, creating a strong seal. The shock-absorbing silicone rubber cup helps protect the surface of your vehicle.
The included remote kit provides you full control over the RS2/RS 3/RS 3 Pro, including start/stop, either wirelessly or by wire from inside the car, and the included monitor bracket simplifies your monitoring situation. This system supports any gimbal that can mount via 1/4"-20 screws and power via D-Tap. The Remote Control Handle only supports the RS2/RS 3/RS 3 Pro. The system packs neatly into the included transport case.
- Quick assembly
- Durable and lightweight
- Folding dovetail plate
- Run/stop functionality
- Flexible assembly
- The Pro Kit features the Remote Control Kit that offers full wired or wireless control of the DJI RS 2/RS 3/RS 3 Pro and includes the Hydra Alien Monitor Bracket, making it easier to monitor your footage while controlling the RS 2. It also includes a thumbstick that allows you to control the pan and tilt of your gimbal for maximum precision while operating.
- Custom-made power supply baseplate and side holding bracket for RS 2/RS 3/RS 3 Pro provide additional protection for your camera during high-speed driving and bumpy shooting conditions.
- Various and flexible mounting options. Supports high and low shooting angles. Compatible with a wide range of car types and complex mounting surfaces.
- The system also uses a shock-absorbing arm to better stabilize the camera for certain shots as well as a spring-loaded cradle head if the intended shot requires that the gimbal be flipped upside down.
- The newly included Hydraulic Dampening Pole further stabilizes the arm to provide smoother results when driving conditions are less than optimal.
Tilta HDA-T02 Specs
| Compatibility | DJI Ronin RS 2/RS 3/RS 3 Pro |
| Power Source | Battery (Not Included) |
| Battery Type | 1 x V-Mount |
| Mounting | Multiple x Suction Cups |
| Material of Construction | Aluminum |
| Cable Length | Not Specified by Manufacturer |
| Dimensions | 2.7 x 1.1 x 0.6' / 83 x 33 x 17 cm |
| Weight | 14.3 lb / 6.5 kg |
| Package Weight | 41.5 lb |
| Box Dimensions (LxWxH) | 38.25 x 17 x 7" |
- Tilta Hydra Alien Car Mounting System Pro Kit (V-Mount)
- Hydra Alien Dovetail Plate L1
- Hydra Alien Dovetail Plate L2
- Hydra Alien Dovetail Plate L3
- Hydra Alien Dovetail Plate L4
- Hydra Alien Dovetail Connector Plate
- Hydra Alien Large Suction Cup
- 2 x Hydra Alien Small Suction Cup
- Hydra Alien Shock-Absorbing Arm with Hydraulic Damping Pole
- Tilta Power Supply Base Plate for DJI RS 2/RS 3/RS 3 Pro
- 8 x Counterweight (7.7 oz)
- Hydra Alien Cable Clamp Suction Cup Set
- Hydra Alien Tool Kit
- Safety Belt
- Hydra Dual Battery Plate Cradle Head
- Hydra Alien V-Mount Battery Plate
- Hydra Alien 90-Degree Adapter for Shock-Absorbing Head
- Hydra Alien Shock-Absorbing Head
- Hydra Alien Dual Battery Plate Support Bracket
- Hydra Alien Monitor Bracket
- Remote Control Handle for RS 2/Ronin S/RS 3/RS 3 Pro
- Remote Control Receiver Module for RS 2/RS 3/RS 3 Pro
- 6-Pin to 6-Pin LEMO Cable
- Hydra Alien Car Mounting Hard-Shell Waterproof Safety Case
- Limited 1-Year Warranty on Electronic Components
- Limited 2-Year Warranty on Mechanical Components
- Barcode: 60875
- UPC Barcode: 810076271712
- Supplier Code: HDA-T02-A-V